Pneumatic pump chip by 3D printing technology

CORC > 沈阳自动化研究所 > 中国科学院沈阳自动化研究所 > 机器人学研究室

	Pneumatic pump chip by 3D printing technology
	Wang JY(王敬依); Yao P(姚萍); Jiao ND(焦念东); Tung, Steve; Liu LQ(刘连庆)
	2015
会议名称	5th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2015
会议日期	October 5-9, 2015
会议地点	Changchun, China
关键词	3D printing pump microfluidic chip pneumatic actuation flow rate time and cost saving
页码	240-244
中文摘要	This paper presents a new method of microfluidic chip fabrication using 3D design and 3D printing techniques. The printed materials are flexible and inexpensive. The fabrication procedure is time-saving and less complex. The water leakage and hydrophilic test are performed to prove the advantages over traditional methods. The flow rates of the printed pump chip have been tested under varied applied pneumatic pressures and pumping frequencies. A maximal flow rate of 16.08 μL/min is achieved at the driving frequency of about 10 Hz at pressure of 30 psi. And a maximal flow rate of 38.60 μL/min is achieved at the driving frequency of about 10 Hz at pressure of 40 psi.IEEE.
收录类别	EI ; CPCI（ISTP）
产权排序	1
会议录	5th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2015 - Conference Proceedings
会议录出版者	IEEE
会议录出版地	Piscataway, NJ, USA
语种	英语
ISSN号	2373-5422
ISBN号	978-1-4673-9625-7
WOS记录号	WOS:000380540600004
内容类型	会议论文
源URL	[http://ir.sia.cn/handle/173321/18620]
专题	沈阳自动化研究所_机器人学研究室
推荐引用方式 GB/T 7714	Wang JY,Yao P,Jiao ND,et al. Pneumatic pump chip by 3D printing technology[C]. 见:5th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2015. Changchun, China. October 5-9, 2015.