基于梯形算子的AFM驱动器非对称迟滞性校正 | |
王栋; 于鹏; 周磊; 刘柱; 董再励 | |
刊名 | 仪器仪表学报 |
2015 | |
卷号 | 36期号:1页码:32-39 |
关键词 | 非对称PI模型 梯形算子 原子力显微镜 压电陶瓷 迟滞性前馈校正 逆模型直接辨识 |
ISSN号 | 0254-3087 |
其他题名 | Asymmetric hysteresis calibration of AFM actuator based on keystone operator |
产权排序 | 1 |
中文摘要 | 原子力显微镜(AFM)通常采用压电陶瓷(PZT)作为驱动器以实现纳米尺度的观测和操作。然而,PZT自身的迟滞非线性会对AFM观测质量和操作精度产生很大影响。基于Prandtl-Ishlinskii(PI)模型的前馈控制方法可对PZT的迟滞非线性进行补偿,但传统PI模型无法消除PZT的非对称迟滞性的影响。针对这个问题,提出一种基于梯形算子的非对称迟滞模型,并可用系统辨识方法获取逆模型参数,该方法可有效实现具有非对称迟滞特性驱动器的前馈补偿控制。AFM系统实验证明,该模型可有效减小非对称迟滞性导致的建模误差,基于该模型的前馈迟滞补偿控制可有效提高AFM的扫描成像质量。 |
英文摘要 | Piezoelectric ( PZT) actuator is often used in atomic force microscope to realize nano-scale observation and manipulation. However,the intrinsic hysteresis non-linearity of PZT strongly affects observation quality and manipulation accuracy. Prandtl-Ishlinskii ( PI) model based feedforward controller can compensate the hysteresis non-linearity of PZT,but the conventional PI model cannot eliminate the effect of asymmetric hysteresis. Aiming to solve the problem,an asymmetric hysteresis model based on keystone operator is proposed. Parameters of inverse model are obtained through system identification method,and the feedforward calibration is implemented based on the inverse model. Experiment in AFM system shows that modeling errors caused by asymmetric hysteresis are effective reduced by the proposed hysteresis model,and imaging quality of the custom-built AFM is improved by feedforward hysteresis compensation based on the model. |
收录类别 | EI ; CSCD |
资助信息 | 国家自然科学基金青年基金(61304251); 国家863计划(2012AA041204); 中国科学院科研装备研制(YZ201245)资助项目 |
语种 | 中文 |
CSCD记录号 | CSCD:5353294 |
公开日期 | 2015-03-17 |
内容类型 | 期刊论文 |
源URL | [http://ir.sia.cn/handle/173321/15740] |
专题 | 沈阳自动化研究所_机器人学研究室 |
推荐引用方式 GB/T 7714 | 王栋,于鹏,周磊,等. 基于梯形算子的AFM驱动器非对称迟滞性校正[J]. 仪器仪表学报,2015,36(1):32-39. |
APA | 王栋,于鹏,周磊,刘柱,&董再励.(2015).基于梯形算子的AFM驱动器非对称迟滞性校正.仪器仪表学报,36(1),32-39. |
MLA | 王栋,et al."基于梯形算子的AFM驱动器非对称迟滞性校正".仪器仪表学报 36.1(2015):32-39. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论