Preparation and Magnetic Property of Carbon Nanotube/NiZnCo Ferrite Composite

CORC > 宁波材料技术与工程研究所 > 中国科学院宁波材料技术与工程研究所 > 宁波所知识产出

	Preparation and Magnetic Property of Carbon Nanotube/NiZnCo Ferrite Composite
	Huang Q(黄庆) ; Xiaobing Zhou1, a, Huifeng Cheng1, b, Junping Wang1, c, Jin Lei1, d, Tongming Huang 2,e, Weiming Pan 2,f, Qing Huang1,g,*
刊名	Journal of Advanced Ceramics
	2013-10-29
期号	833 页码:286—290
通讯作者	黄庆
合作状况	李雨桐
中文摘要	Precipitation hydrothermal method was used to synthesis carbon nanotubes (CNTs) /Ni0.5Zn0.45Co0.05Fe2O4 composites, and then 1wt%CNTs/Ni0.5Zn0.45Co0.05Fe2O4 ceramics were fabricated by spark plasma sintering (SPS) technique. The phase, microstructure and magnetic properties of 1wt%CNTs/Ni0.5Zn0.45Co0.05Fe2O4 were investigated. The results show that, the substitution of zinc ions by cobalt didn’t change the spinel phase of Ni-Zn ferrite. In the SPS process, CNTs promoted the sintering kinetics, and the liquid state of Ni can act as sintering aid to accelerate the grain boundary extension. After sintered by SPS at 750 0C for 5min, the density of the bulk is about 5.2g/cm3, the grain size increased to 91nm, and the saturation magnetization of the 1wt%CNTs/Ni0.5Zn0.45Co0.05Fe2O4 composite ceramics reached at 79.7emu/g.
学科主题	材料科学
原文出处	SCI收录
公开日期	2013-12-16
内容类型	期刊论文
源URL	[http://ir.nimte.ac.cn/handle/174433/10078]
专题	宁波材料技术与工程研究所_宁波所知识产出
推荐引用方式 GB/T 7714	Huang Q,Xiaobing Zhou1, a, Huifeng Cheng1, b, Junping Wang1, c, Jin Lei1, d, Tongming Huang 2,e, Weiming Pan 2,f, Qing Huang1,g,*. Preparation and Magnetic Property of Carbon Nanotube/NiZnCo Ferrite Composite[J]. Journal of Advanced Ceramics,2013(833):286—290.
APA	Huang Q,&Xiaobing Zhou1, a, Huifeng Cheng1, b, Junping Wang1, c, Jin Lei1, d, Tongming Huang 2,e, Weiming Pan 2,f, Qing Huang1,g,*.(2013).Preparation and Magnetic Property of Carbon Nanotube/NiZnCo Ferrite Composite.Journal of Advanced Ceramics(833),286—290.
MLA	Huang Q,et al."Preparation and Magnetic Property of Carbon Nanotube/NiZnCo Ferrite Composite".Journal of Advanced Ceramics .833(2013):286—290.