Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin

doi:10.1109/TIM.2021.3057291

CORC > 深海科学与工程研究所 > 中国科学院深海科学与工程研究所 > 深海工程技术部 > 深海资源开发研究室

	Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin
	Yang Y(杨阳)1,5; Plovie, B (Plovie, Bart)1,2; Chiesura, G (Chiesura, Gabriele)3,4; Vervust, T (Vervust, Thomas)1; Daelemans, L (Daelemans, Lode)4
刊名	IEEE Transactions on Instrumentation and Measurement
	2021
卷号	70 页码:6004809
关键词	Cure monitoring dielectric sensor degree of cure fully integrated system glass transition temperature
ISSN号	0018-9456
DOI	10.1109/TIM.2021.3057291
通讯作者	Yang, Yang(yang.yang0513@gmail.com) ; Vanfleteren, Jan(jan.vanfleteren@imec.be)
英文摘要	Flexible dielectric sensors received significant interest for real-time in situ cure monitoring of polymeric composites over the past decade. Currently, the state-of-the-art dielectric sensors mainly focus on detecting the distinct stages of the polymeric composite curing process. While low-cost and quantitative monitoring of the thermal, mechanical, and chemical properties of the materials during the cure is of great interest, to date, such a sensor system has not been realized because the existing devices excessively depend on external instrumentations, combined with a lack of an embedded reliable data processing module. Here, a fully integrated dielectric monitoring sensor system (DMS) incorporating dielectric and temperature sensors is developed, capable of monitoring in real-time the temperature, the degree of cure, and the glass transition temperature (T-g) of polymeric composites. An independent characterization of the cure kinetics was performed using differential scanning calorimetry and Raman spectroscopy. These data enabled associating the main physical and chemical transformations in the polymeric materials with particular features observed in the dielectric measurements. We demonstrate the accurate estimation of the degree of cure and T-g of an epoxy resin. The proposed system shows the potential for a new generation of intelligent manufacturing technology of composite materials.
资助项目	Flemish Agency for Innovation by Science and Technology (IWT) through the program for Strategic Basic Research (SBO)[120024] ; National Key Research and Development Program of China[2019YFC1408603]
WOS关键词	RAMAN-SPECTROSCOPY ; FABRICATION ; DESIGN ; RELAXATION ; DSC
WOS研究方向	Engineering ; Instruments & Instrumentation
语种	英语
出版者	IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
WOS记录号	WOS:000636274000123
资助机构	Flemish Agency for Innovation by Science and Technology (IWT) through the program for Strategic Basic Research (SBO) ; National Key Research and Development Program of China
内容类型	期刊论文
版本	出版稿
源URL	[http://ir.idsse.ac.cn/handle/183446/9092]
专题	深海工程技术部_深海资源开发研究室
作者单位	1.Univ Ghent, Ctr Microsyst Technol, IMEC, B-9052 Ghent, Belgium 2.OIP Sensor Syst, B-9700 Oudenaarde, Belgium 3.Siemens Garnesa Renewable Energy, DK-9220 Aalborg, Denmark 4.Univ Ghent, Dept Mat Text & Chem Engn MaTCh, B-9052 Ghent, Belgium 5.Institute of Deep-sea Science and Engineering, Chinese Academy of Sciences, Sanya, Hainan, 572000, China
推荐引用方式 GB/T 7714	Yang Y,Plovie, B ,Chiesura, G ,et al. Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin[J]. IEEE Transactions on Instrumentation and Measurement,2021,70:6004809.
APA	Yang Y,Plovie, B ,Chiesura, G ,Vervust, T ,&Daelemans, L .(2021).Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin.IEEE Transactions on Instrumentation and Measurement,70,6004809.
MLA	Yang Y,et al."Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin".IEEE Transactions on Instrumentation and Measurement 70(2021):6004809.