Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical, and tribological properties

CORC > 兰州化学物理研究所 > 中国科学院兰州化学物理研究所 > 固体润滑国家重点实验室

	Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical, and tribological properties
	Meng Zhaojie ; Wang Yunxia ; Liu Hao ; Yan Fengyuan
刊名	Polymers for Advanced Technologies
	2022
卷号	33 期号:12 页码:4142-4151
关键词	attapulgite carbon fiber interface UHMWPE
英文摘要	The attapulgite nanofibers (ATP) were grafted on the surface of carbon fibers (CF) by polyetherimide (PEI) with long chain to reinforce the thermal, mechanical properties, and fretting wear resistance of ultra-high molecular weight polyethylene. The results showed that the surface roughness of CF modified by ATP nanofibers were highly increased. Meanwhile, the thermal, mechanical, and tribological properties of the ATP-PEI-CF/UPE composite were significantly improved, especially the enhance-ment in heat distortion temperature, compressive modulus, and wear resistance. The improvement mechanisms of the corresponding properties were mainly attributed to the increase of mechanical interlocking of the matrix and the hybrid fillers, which could not only transfer the load and heat applied to the matrix to the fibers, but also impede the friction damage of the matrix during fretting wear process.
语种	英语
内容类型	期刊论文
源URL	[http://ir.licp.cn/handle/362003/29610]
专题	兰州化学物理研究所_固体润滑国家重点实验室
通讯作者	Wang Yunxia; Yan Fengyuan
作者单位	1.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences 2.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences 3.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences 4.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences
推荐引用方式 GB/T 7714	Meng Zhaojie,Wang Yunxia,Liu Hao,et al. Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical, and tribological properties[J]. Polymers for Advanced Technologies,2022,33(12):4142-4151.
APA	Meng Zhaojie,Wang Yunxia,Liu Hao,&Yan Fengyuan.(2022).Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical, and tribological properties.Polymers for Advanced Technologies,33(12),4142-4151.
MLA	Meng Zhaojie,et al."Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical, and tribological properties".Polymers for Advanced Technologies 33.12(2022):4142-4151.