Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties

CORC > 兰州化学物理研究所 > 中国科学院兰州化学物理研究所 > 固体润滑国家重点实验室

	Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties
	Zhaojie Meng 1,2; Yunxia Wang 2; Hao Liu 2; Fengyuan Yan 2
刊名	Polymers for Advanced Technologies
	2022
期号	33 页码:4142–4151
关键词	attapulgite, carbon fiber, interface, UHMWPE
英文摘要	The attapulgite nanofibers (ATP) were grafted on the surface of carbon fibers (CF) by polyetherimide (PEI) with long chain to reinforce the thermal, mechanical properties, and fretting wear resistance of ultra-high molecular weight polyethylene. The results showed that the surface roughness of CF modified by ATP nanofibers were highly increased. Meanwhile, the thermal, mechanical, and tribological properties of the ATP-PEI-CF/UPE composite were significantly improved, especially the enhance-ment in heat distortion temperature, compressive modulus, and wear resistance. The improvement mechanisms of the corresponding properties were mainly attributed to the increase of mechanical interlocking of the matrix and the hybrid fillers, which could not only transfer the load and heat applied to the matrix to the fibers, but also impede the friction damage of the matrix during fretting wear process.
内容类型	期刊论文
源URL	[http://ir.licp.cn/handle/362003/29493]
专题	兰州化学物理研究所_固体润滑国家重点实验室
通讯作者	Zhaojie Meng; Fengyuan Yan
作者单位	1.中国科学院大学 2.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
推荐引用方式 GB/T 7714	Zhaojie Meng,Yunxia Wang,Hao Liu,et al. Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties[J]. Polymers for Advanced Technologies,2022(33):4142–4151.
APA	Zhaojie Meng,Yunxia Wang,Hao Liu,&Fengyuan Yan.(2022).Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties.Polymers for Advanced Technologies(33),4142–4151.
MLA	Zhaojie Meng,et al."Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties".Polymers for Advanced Technologies .33(2022):4142–4151.