Mechanical Analysis of Shape Memory Alloy Beams under Asymmetric Bending

doi:10.1051/jnwpu/20203840881

CORC > 兰州理工大学 > 兰州理工大学 > 理学院

	Mechanical Analysis of Shape Memory Alloy Beams under Asymmetric Bending
	Yang, Jingning; Wang, Yongxiang; Ma, Liansheng
刊名	Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University
	2020-08-01
卷号	38 期号:4 页码:881-888
关键词	Engineering Asymmetric bending Constitutive relationships Cross section shape Mechanical analysis Rectangular section Step-by-step method Tension and compression Tension-compression asymmetry
ISSN号	10002758
DOI	10.1051/jnwpu/20203840881
英文摘要	Based on the bending theory of beams, combining with the constitutive relationship of shape memory alloy materials, the asymmetric bending of shape memory alloy beams under concentrated load was studied. Considering tension-compression asymmetry on both sides of the tension and compression in the process of bending, tension-compression asymmetry coefficient was introduced, by using the step-by-step method. The stress distribution, neutral axis displacement, curvature and phase boundary of the beam sections of the I-shaped cross-section shape memory alloy beam were analyzed. The results show that under the same load, the maximum offset of the neutral axis displacement increases with the increase of tension-compression asymmetry coefficient. Under the same tension-compression asymmetry coefficient, the displacement and curvature of the neutral axis increased with the increase of load; as tension-compression asymmetry coefficient increased, the proportion of mixed phase increased gradually, the proportion of martensite phase decreased, and the asymmetry of phase boundary became more obvious. Under the same conditions, the rectangular section is more suitable. The cross section of I shaped cross section was prone to occur phase transformation. © 2020 Journal of Northwestern Polytechnical University.
语种	中文
出版者	Northwestern Polytechnical University
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/114999]
专题	理学院
作者单位	School of Science, Lanzhou University of Technology, Lanzhou; 730050, China
推荐引用方式 GB/T 7714	Yang, Jingning,Wang, Yongxiang,Ma, Liansheng. Mechanical Analysis of Shape Memory Alloy Beams under Asymmetric Bending[J]. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University,2020,38(4):881-888.
APA	Yang, Jingning,Wang, Yongxiang,&Ma, Liansheng.(2020).Mechanical Analysis of Shape Memory Alloy Beams under Asymmetric Bending.Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University,38(4),881-888.
MLA	Yang, Jingning,et al."Mechanical Analysis of Shape Memory Alloy Beams under Asymmetric Bending".Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 38.4(2020):881-888.