MILLING MACHINE ERROR MODELLING AND ANALYSIS IN THE MACHINING OF CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEARS | |
Yang, Wu2; Li, Hou2; Ma Dengqiu1; Wei Yongqiao3; Lan, Luo2 | |
刊名 | TRANSACTIONS OF FAMENA |
2020-12-01 | |
卷号 | 44期号:4页码:13-29 |
关键词 | Circular-Arc-Tooth-Trace (CATT) cylindrical gear milling machine topological structure model coordinate transmission matrix comprehensive error model |
ISSN号 | 1333-1124 |
DOI | 10.21278/TOF.444009419 |
英文摘要 | This paper is to study errors of a milling machine used for the machining of Circular-Arc-Tooth-Trace (CATT) cylindrical gears. A topological structure model of the milling machine is established using the lower numbered body array approach. Coordinate transformation matrices between adjacent parts of the milling machine are set up by the D-H homogeneous transformation matrix. Based on the topological structure model and transformation matrices, a comprehensive error model of a milling machine used for the machining of CATT gears is established. According to the error model, the angle errors of the milling point are linear combinations of the angle errors of moving parts, while the displacement errors of the milling point are related to displacement errors, the angle errors of moving parts, the adjustment parameters of machine tools, and the geometric parameters of the gear. Finally, the influence of the errors of the cutter head on the milling point errors in the machining of CATT gears are discussed. The research can provide a theoretical basis for the error analysis, precision design, and the geometric error compensation of a milling machine used for CATT gear machining. |
WOS研究方向 | Engineering ; Materials Science |
语种 | 英语 |
出版者 | UNIV ZAGREB FAC MECHANICAL ENGINEERING & NAVAL ARCHITECTURE |
WOS记录号 | WOS:000619207600002 |
内容类型 | 期刊论文 |
源URL | [http://ir.lut.edu.cn/handle/2XXMBERH/155038] |
专题 | 机电工程学院 |
作者单位 | 1.Zunyi Normal Coll, Coll Eng & Technol, Zunyi, Guizhou, Peoples R China; 2.Sichuan Univ, Chengdu, Peoples R China; 3.Lanzhou Univ Technol, Sch Mechatron Eng, Lanzhou, Peoples R China |
推荐引用方式 GB/T 7714 | Yang, Wu,Li, Hou,Ma Dengqiu,et al. MILLING MACHINE ERROR MODELLING AND ANALYSIS IN THE MACHINING OF CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEARS[J]. TRANSACTIONS OF FAMENA,2020,44(4):13-29. |
APA | Yang, Wu,Li, Hou,Ma Dengqiu,Wei Yongqiao,&Lan, Luo.(2020).MILLING MACHINE ERROR MODELLING AND ANALYSIS IN THE MACHINING OF CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEARS.TRANSACTIONS OF FAMENA,44(4),13-29. |
MLA | Yang, Wu,et al."MILLING MACHINE ERROR MODELLING AND ANALYSIS IN THE MACHINING OF CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEARS".TRANSACTIONS OF FAMENA 44.4(2020):13-29. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论