Friction and wear behaviours of YG8 sliding against austempered ductile iron under dry, chilled air and minimal quantity lubrication conditions | |
Li, Baodong1,2; Rui, Zhiyuan1 | |
刊名 | ADVANCES IN MECHANICAL ENGINEERING |
2019-05 | |
卷号 | 11期号:5 |
关键词 | YG8-cemented carbide austempered ductile iron friction and wear chilled air minimal quantity lubrication |
ISSN号 | 1687-8132 |
DOI | 10.1177/1687814019847064 |
英文摘要 | In this study, to investigate the friction and wear behaviours of cutting tools made of YG8-cemented carbide in the process of cutting austempered ductile iron, friction and wear tests at different applied loads (100-500 N) and sliding speeds (40-120 m/ min) under conditions of dry, chilled air and minimal quantity lubrication were carried out using a tribometer and a composite spray cooling device. In addition, the morphology and material transmission of the worn surfaces were analysed by scanning electron microscopy and energy dispersive spectroscopy. The results showed that the wear rates of the YG8 pins increased with increasing applied loads; however, the sliding speed exerted no significant influence on wear of the YG8 pins. Under dry conditions, the worn surface was mainly found to exhibit abrasive wear under a low load. With increasing loads, the transfer films were formed, and then led to fracturing and spalling of the frictional surfaces. Under chilled air and minimal quantity lubrication conditions, the worn surface was smoother than that under dry conditions. The most favourable results were obtained under minimal quantity lubrication condition due to the oil film formed on the surface of the frictional pairs. |
资助项目 | Science and Technology Plan Project of Gansu Province[18JR3RA226] ; Innovation Team of Gansu Province[2016C-7][2018C-23] ; National Natural Science Foundation of China[51865027] |
WOS研究方向 | Thermodynamics ; Engineering |
语种 | 英语 |
出版者 | SAGE PUBLICATIONS LTD |
WOS记录号 | WOS:000481669900001 |
状态 | 已发表 |
内容类型 | 期刊论文 |
源URL | [http://119.78.100.223/handle/2XXMBERH/31899] |
专题 | 兰州理工大学 机电工程学院 |
通讯作者 | Rui, Zhiyuan |
作者单位 | 1.Lanzhou Univ Technol, Coll Mechanoelect Engn, Lanzhou 730050, Gansu, Peoples R China 2.Lanzhou Inst Technol, Coll Mechanoelect Engn, Lanzhou, Gansu, Peoples R China |
推荐引用方式 GB/T 7714 | Li, Baodong,Rui, Zhiyuan. Friction and wear behaviours of YG8 sliding against austempered ductile iron under dry, chilled air and minimal quantity lubrication conditions[J]. ADVANCES IN MECHANICAL ENGINEERING,2019,11(5). |
APA | Li, Baodong,&Rui, Zhiyuan.(2019).Friction and wear behaviours of YG8 sliding against austempered ductile iron under dry, chilled air and minimal quantity lubrication conditions.ADVANCES IN MECHANICAL ENGINEERING,11(5). |
MLA | Li, Baodong,et al."Friction and wear behaviours of YG8 sliding against austempered ductile iron under dry, chilled air and minimal quantity lubrication conditions".ADVANCES IN MECHANICAL ENGINEERING 11.5(2019). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论