Forming Characteristics and Analysis of Nitrided Layers During the Laser Nitriding Titanium Alloy | |
Yao Xiaochun; Shi Yu; Li Tingqu; Li Wensheng | |
刊名 | RARE METAL MATERIALS AND ENGINEERING |
2019-12 | |
卷号 | 48期号:12页码:4060-4067 |
关键词 | laser nitriding titanium alloy surface morphology molten pool geometry forming coefficient |
ISSN号 | 1002-185X |
英文摘要 | Ti-6Al-4V alloy was nitrided in nitrogen atmosphere using diode laser, in order to study the influence of line energy, laser power and scanning speed on the surface morphology, molten pool geometry, width, penetration depth and the forming coefficient of the nitrided layers. The surface and cross-section morphologies of the nitrided layers were taken by optical and scanning electron microscopy, and the hardness was measured by microhardness tester. The results show that the surface morphology are composed of the smooth and rough surface. When the surface temperature of the molten pool is low, increasing the interaction time has little effect on the surface morphology. With the increase of laser power under the same line energy, the melting depth and width of the nitrided layer increase, and the forming coefficient decreases. As the scanning speed decreases under the same laser power, the penetration depth and width increase, and the forming coefficient reduces. When the forming coefficient is very small, the nitrided layers will produce longitudinally distributed cracks. The convection form and the strength result in the formation of a hemispherical interface, a finger interface, a W-shaped interface and so on; besides, multiple inflections happen in the slope of the boundaries of molten pool. |
URL标识 | 查看原文 |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 中文 |
出版者 | NORTHWEST INST NONFERROUS METAL RESEARCH |
WOS记录号 | WOS:000504920800040 |
状态 | 已发表 |
内容类型 | 期刊论文 |
源URL | [http://219.246.112.31/handle/2XXMBERH/56503] |
专题 | 材料科学与工程学院 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者 | Shi Yu |
作者单位 | Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730000, Peoples R China |
推荐引用方式 GB/T 7714 | Yao Xiaochun,Shi Yu,Li Tingqu,et al. Forming Characteristics and Analysis of Nitrided Layers During the Laser Nitriding Titanium Alloy[J]. RARE METAL MATERIALS AND ENGINEERING,2019,48(12):4060-4067. |
APA | Yao Xiaochun,Shi Yu,Li Tingqu,&Li Wensheng.(2019).Forming Characteristics and Analysis of Nitrided Layers During the Laser Nitriding Titanium Alloy.RARE METAL MATERIALS AND ENGINEERING,48(12),4060-4067. |
MLA | Yao Xiaochun,et al."Forming Characteristics and Analysis of Nitrided Layers During the Laser Nitriding Titanium Alloy".RARE METAL MATERIALS AND ENGINEERING 48.12(2019):4060-4067. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论