TiC/Ti composite layers fabricated by laser surface alloying | |
Zhang, Jian-bin; Fan, Ding; Dai, Jing-jie; Sun, Yao-ning | |
2007 | |
关键词 | laser surface alloying titanium carbide TiC-Ti composite |
卷号 | 336-338 |
页码 | 1148-1150 |
英文摘要 | Laser surface alloying is an attractive processing to improve surface hardness, wear and corrosion resistance. In this paper, a continuous wave CO2 laser was used to irradiate commercially pure titanium surface with pre-placed active carbon powders in argon atmosphere. A compact, well-adherent, and crack-free TiC/Ti composite layer was obtained. The microstructure and phase constitution of the alloyed layers were determined and analyzed, and the micro-hardness was measured. The result of X ray diffraction (XRD) analysis shows that the alloyed layers contain TiC and Ti (martensite). The scanning electron microscopy (SEM) observation shows TIC growth morphologies have a well-developed dendrite, cellular dendrite, globular microstructure and cross-petal microstructure. The mechanism of the formation of titanium carbides is discussed. Micro-hardness of the laser surface alloyed layer was improved to 420 Hv as compared to 200 Hv of the as-received commercially pure titanium. |
会议录 | HIGH-PERFORMANCE CERAMICS IV, PTS 1-3 |
会议录出版者 | TRANS TECH PUBLICATIONS LTD |
会议录出版地 | KREUZSTRASSE 10, 8635 DURNTEN-ZURICH, SWITZERLAND |
语种 | 英语 |
WOS研究方向 | Materials Science |
WOS记录号 | WOS:000246148001071 |
内容类型 | 会议论文 |
源URL | [http://119.78.100.223/handle/2XXMBERH/38146] |
专题 | 材料科学与工程学院 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者 | Zhang, Jian-bin |
作者单位 | Lanzhou Univ Technol, State Key Lab Gansu Adv Nonferrous Met Mat, Lanzhou 730050, Peoples R China |
推荐引用方式 GB/T 7714 | Zhang, Jian-bin,Fan, Ding,Dai, Jing-jie,et al. TiC/Ti composite layers fabricated by laser surface alloying[C]. 见:. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论