CORC  > 兰州理工大学  > 兰州理工大学  > 材料科学与工程学院
Effects of annealing on microstructure and mechanical properties of bulk nanocrystalline Fe3Al based alloy with 10 wt. % Mn prepared by aluminothermic reaction
La, Pei-Qing; Xin-Guo; Yang, Yang; Cheng, Chun-Jie; Lu, Xue-Feng; Wei, Yu-Peng
2011
关键词iron aluminides(based on Fe3Al) annealing mechanical properties nanocrystalline
卷号236-238
DOI10.4028/www.scientific.net/AMR.236-238.1939
页码1939-1944
英文摘要Microstructure and mechanical properties of bulk nanocrystalline Fe3Al based alloy with 10 wt. % Mn prepared by aluminothermic reaction after annealing at 600, 800 and 1000 degrees C for 8 h were investigated in order to gain insights in effects of annealing. Crystal structure of the alloy did not change and a fiber phase with enriched Mn appeared in the annealed alloy. Grain size of the alloy changed a little after annealing at 600 degrees C but increased a lot after annealing at 800 and 1000 degrees C. The annealed alloy had plasticity in compression at room temperature and the alloy annealed at 1000 degrees C had yield strength of 782 MPa. The alloy without annealing has creep properties in compression at 800 and 1000 degrees C and can be easily hot rolled to strip and sheet.
会议录APPLICATION OF CHEMICAL ENGINEERING, PTS 1-3
会议录出版者TRANS TECH PUBLICATIONS LTD
会议录出版地LAUBLSRUTISTR 24, CH-8717 STAFA-ZURICH, SWITZERLAND
语种英语
WOS研究方向Engineering ; Materials Science
WOS记录号WOS:000302924100394
内容类型会议论文
源URL[http://119.78.100.223/handle/2XXMBERH/37380]  
专题材料科学与工程学院
省部共建有色金属先进加工与再利用国家重点实验室
通讯作者La, Pei-Qing
作者单位Lanzhou Univ Technol, State Key Lab Gansu Adv Nonferrous Met Mat, Lanzhou 730050, Peoples R China
推荐引用方式
GB/T 7714
La, Pei-Qing,Xin-Guo,Yang, Yang,et al. Effects of annealing on microstructure and mechanical properties of bulk nanocrystalline Fe3Al based alloy with 10 wt. % Mn prepared by aluminothermic reaction[C]. 见:.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace