Analysis of Spreading of the Melt in Diode Laser-TIG Hybrid Cladding Process

doi:10.1007/978-981-10-5355-9_13

	Analysis of Spreading of the Melt in Diode Laser-TIG Hybrid Cladding Process
	Li, Xubin; Shi, Yu; Zhu, Ming; Yao, Xiaochun
	2018
关键词	Cladding Wetting Contact angle TIG arc
卷号	1
期号	1
DOI	10.1007/978-981-10-5355-9_13
页码	143-150
英文摘要	A diode laser-TIG hybrid cladding process was proposed in this study to make further improvement on wettability and spreadability of cladding layer. Cladding layers fabricated with different heat sources were wire-cutted to observe their cross section so as to characterize the wettability. The role of TIG arc in this process is analyzed and illustrated in detail through the cladding process recorded by a high-speed camera. The functions of TIG arc in this process are elevating thermal input to reduce surface tension and exerting extra forces on the melt to help it spread out.
会议录	TRANSACTIONS ON INTELLIGENT WELDING MANUFACTURING, VOL I, NO. 1 2017
会议录出版者	SPRINGER-VERLAG SINGAPORE PTE LTD
会议录出版地	152 BEACH ROAD, #21-01/04 GATEWAY EAST, SINGAPORE, 189721, SINGAPORE
语种	英语
资助项目	National Natural Science Foundation of China[51675256]
WOS研究方向	Engineering ; Robotics
WOS记录号	WOS:000451078400013
内容类型	会议论文
源URL	[http://119.78.100.223/handle/2XXMBERH/36135]
专题	材料科学与工程学院省部共建有色金属先进加工与再利用国家重点实验室
通讯作者	Shi, Yu
作者单位	Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Gansu, Peoples R China
推荐引用方式 GB/T 7714	Li, Xubin,Shi, Yu,Zhu, Ming,et al. Analysis of Spreading of the Melt in Diode Laser-TIG Hybrid Cladding Process[C]. 见:.