Effects of Al-Ti-C-Ce Master Alloy on Microstructure and Mechanical Properties of Hypoeutectic Al-7%Si Alloy | |
Ding, Wanwu1; Zhao, Xiaoyan; Zhao, Wenjun; Guo, Tingbiao; Tang, Xinchang; Qiao, Jisen; Xia, Tiandong | |
刊名 | INTERNATIONAL JOURNAL OF METALCASTING |
2019-04 | |
卷号 | 13期号:2页码:426-437 |
关键词 | hypoeutectic Al-7%Si alloy
Al-Ti |
ISSN号 | 1939-5981 |
DOI | 10.1007/s40962-018-0266-8 |
英文摘要 | It is well known that the mechanical properties of hypoeutectic Al-7%Si alloys are influenced by the size, morphology, and distribution of primary -Al and eutectic Si crystals. In the present work, a novel Al-Ti-C-Ce master alloy was prepared by the pure molten aluminum thermal explosion reaction, and its effects on the microstructure and mechanical properties of hypoeutectic Al-7%Si alloy were investigated. The results show that the Al-Ti-C-Ce master alloy containing -Al, granular TiC, lump-like TiAl3, and block-like Ti2Al20Ce has excellent refining and modification properties for hypoeutectic Al-7%Si alloy. When 1.5wt.% Al-Ti-C-Ce master alloy is added, the coarse dendritic -Al in hypoeutectic Al-7%Si alloy is refined into equiaxed grains. The secondary dendritic arm spacing (SDAS) was also reduced, and the coarse needle-flake eutectic Si phase was transformed into a fibrous and granular phase. It was found that the ultimate tensile strength and elongation increased by 59% and 56%, respectively, due to the decrease in the SDAS of primary -Al dendrites and the modification of eutectic Si crystals. Moreover, the change of mechanical properties corresponds to the evolution of microstructure. |
资助项目 | National Natural Science Foundation of China[51661021][51665033] ; Natural Science Foundation of Gansu Province in China[1606RJZA161] ; Gansu key research and development program[18YF1GA061] |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | SPRINGER INTERNATIONAL PUBLISHING AG |
WOS记录号 | WOS:000463755600019 |
状态 | 已发表 |
内容类型 | 期刊论文 |
源URL | [http://119.78.100.223/handle/2XXMBERH/31996] |
专题 | 兰州理工大学 材料科学与工程学院 |
通讯作者 | Ding, Wanwu |
作者单位 | 1.State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou, Gansu, Peoples R China 2.Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou, Gansu, Peoples R China |
推荐引用方式 GB/T 7714 | Ding, Wanwu,Zhao, Xiaoyan,Zhao, Wenjun,et al. Effects of Al-Ti-C-Ce Master Alloy on Microstructure and Mechanical Properties of Hypoeutectic Al-7%Si Alloy[J]. INTERNATIONAL JOURNAL OF METALCASTING,2019,13(2):426-437. |
APA | Ding, Wanwu.,Zhao, Xiaoyan.,Zhao, Wenjun.,Guo, Tingbiao.,Tang, Xinchang.,...&Xia, Tiandong.(2019).Effects of Al-Ti-C-Ce Master Alloy on Microstructure and Mechanical Properties of Hypoeutectic Al-7%Si Alloy.INTERNATIONAL JOURNAL OF METALCASTING,13(2),426-437. |
MLA | Ding, Wanwu,et al."Effects of Al-Ti-C-Ce Master Alloy on Microstructure and Mechanical Properties of Hypoeutectic Al-7%Si Alloy".INTERNATIONAL JOURNAL OF METALCASTING 13.2(2019):426-437. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论