Design of the hydraulic press assembling the coupling based on the virtual prototype technology

doi:10.4028/www.scientific.net/AMM.44-47.1080

CORC > 兰州理工大学 > 兰州理工大学

	Design of the hydraulic press assembling the coupling based on the virtual prototype technology
	Wu, Xiaohong; Lin, Xiaojun
	2011
会议日期	December 11, 2010 - December 12, 2010
会议地点	Chongqing, China
关键词	Design Hydraulics Manufacture Presses (machine tools) Three dimensional 3D design Design defects Design period Hydraulic oil Hydraulic press Initial stages Innovative product Modeling and simulation Mounting device Software ADAMS Virtual prototype Virtual Prototype Technology Virtual prototyping
卷号	44-47
DOI	10.4028/www.scientific.net/AMM.44-47.1080
页码	1080-1083
英文摘要	In this paper, the hydraulic press to assemble the coupling is designed after its structure characterisdic and work method is introduced. The press mounting device is used to assemble the coupling of a small generator drived by hydraulic oil. In design, the entity model is established using 3D design software Pro/E, and the dynamic and kinimatic characteristics of the virtual prototype of the hydraulic press are simulated in software ADAMS. Thus all kinds of design defects are deleted at the initial stage of the design, the design period can be shorten, the efficiency of design can be raised, and the best and innovative products can be obtatined. © (2011) Trans Tech Publications.
会议录	Applied Mechanics and Materials
会议录出版者	Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
语种	英语
ISSN号	16609336
内容类型	会议论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/115950]
专题	兰州理工大学
作者单位	Mechanical Engineering Department, Lanzhou Polytechnical College, Lanzhou, China
推荐引用方式 GB/T 7714	Wu, Xiaohong,Lin, Xiaojun. Design of the hydraulic press assembling the coupling based on the virtual prototype technology[C]. 见:. Chongqing, China. December 11, 2010 - December 12, 2010.