A COMPARISON OF TOUGHNESS OF C-MN STEEL WITH DIFFERENT GRAIN SIZES | |
CHEN, JH; YAN, C | |
刊名 | METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE |
1992-09 | |
卷号 | 23期号:9页码:2549-2556 |
ISSN号 | 0360-2133 |
DOI | 10.1007/BF02658058 |
英文摘要 | The low-temperature toughness of C-Mn weld steel with different grain sizes was investigated with notched and precracked specimens. The results indicated that the fine grain steel, evaluated by notched specimens (Charpy V-notch and 4 point bending specimens), is tougher than that of the coarse grain steel over a temperature range from -196-degrees-C to -30-degrees-C. On the other hand, the coarse grain steel,,evaluated with precracked specimens, has a remarkably greater plane strain fracture toughness compared to the fine grain steel. The microstructural analysis revealed that the fracture toughness of both the fine grain and the coarse grain steel is not directly related to the distance of the fracture initiation site from the precrack tip or the size of the ferrite grain. The behavioral discrepancy can be explained in terms of the ratio of local fracture stress to yield stress, i.e., sigma(f)/sigma(y). The fine grain steel had a higher sigma(f)/sigma(y) in the notched specimens but a lower value in the precracked specimens compared to the coarse grain steel. The scatter of toughness data can be mainly attributed to the probabilistic distribution of the weakest particle. We suggested that sigma(f)/sigma(y) may be a useful parameter for the engineering evaluation of toughness. |
WOS研究方向 | Materials Science |
语种 | 英语 |
出版者 | MINERALS METALS MATERIALS SOC |
WOS记录号 | WOS:A1992JM38900025 |
状态 | 已发表 |
内容类型 | 期刊论文 |
源URL | [http://119.78.100.223/handle/2XXMBERH/36004] |
专题 | 兰州理工大学 |
通讯作者 | CHEN, JH |
推荐引用方式 GB/T 7714 | CHEN, JH,YAN, C. A COMPARISON OF TOUGHNESS OF C-MN STEEL WITH DIFFERENT GRAIN SIZES[J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,1992,23(9):2549-2556. |
APA | CHEN, JH,&YAN, C.(1992).A COMPARISON OF TOUGHNESS OF C-MN STEEL WITH DIFFERENT GRAIN SIZES.METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,23(9),2549-2556. |
MLA | CHEN, JH,et al."A COMPARISON OF TOUGHNESS OF C-MN STEEL WITH DIFFERENT GRAIN SIZES".METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 23.9(1992):2549-2556. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论