Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum

doi:10.1016/j.jeurceramsoc.2019.11.047

CORC > 金属研究所 > 中国科学院金属研究所

	Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum
	Li, He 1,4; Liu, Yongsheng 1,4; Liu, Yansong 1,4; Zeng, Qingfeng 4; Wang, Jing 1,4; Hu, Kehui 2,5; Lu, Zhigang 2,5; Liang, Jingjing 3
刊名	JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
	2020-11-01
卷号	40 期号:14 页码:4825-4836
关键词	Stereolithography Aluminum oxide Sintering temperature Vacuum Ceramic cores
ISSN号	0955-2219
DOI	10.1016/j.jeurceramsoc.2019.11.047
通讯作者	Liu, Yongsheng(yongshengliu@nwpu.edu.cn) ; Zeng, Qingfeng(qfzeng@nwpu.edu.cn)
英文摘要	Stereolithography (SL) was used to form alumina ceramic cores. The effect of sintering temperature on the microstructure and mechanical properties of the alumina ceramics are investigated, which were sintered in vacuum. The results indicate that, as the sintering temperature increased the particle size of alumina slightly increased, and the interlayer spacing first decreased and then increased. The open porosity of alumina ceramics significantly decreased as the sintering temperature in vacuum increased. The flexural strength and hardness increased as the sintering temperature increased. When sintered at 1150 degrees C, the flexural strength was found to be 33.7 MPa, the shrinkage was 2.3 %, 2.4 %, and 5.3 % in the X, Y, and Z directions, respectively, and the open porosity was 37.9 %. These results are similar to those found from sintering at 1280 degrees C in air.
资助项目	National Key Research and Development Program of China[2018YFB1106600] ; Chinese National Foundation for Natural Sciences[51672217]
WOS研究方向	Materials Science
语种	英语
出版者	ELSEVIER SCI LTD
WOS记录号	WOS:000556262000015
资助机构	National Key Research and Development Program of China ; Chinese National Foundation for Natural Sciences
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/140089]
专题	金属研究所_中国科学院金属研究所
通讯作者	Liu, Yongsheng; Zeng, Qingfeng
作者单位	1.Northwestern Polytech Univ, NPU SAS Joint Res Ctr Adv Ceram, Xian 710072, Shaanxi, Peoples R China 2.Tsinghua Univ, State Key Lab Tribol, Beijing 100084, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 4.Northwestern Polytech Univ, Sci & Technol Thermostruct Composite Mat Lab, Xian 710072, Shaanxi, Peoples R China 5.Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China
推荐引用方式 GB/T 7714	Li, He,Liu, Yongsheng,Liu, Yansong,et al. Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,2020,40(14):4825-4836.
APA	Li, He.,Liu, Yongsheng.,Liu, Yansong.,Zeng, Qingfeng.,Wang, Jing.,...&Liang, Jingjing.(2020).Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum.JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,40(14),4825-4836.
MLA	Li, He,et al."Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum".JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 40.14(2020):4825-4836.