Design and characterization of selective laser-melted Ti6Al4V-5Cu alloy for dental implants

doi:10.1002/maco.202011650

CORC > 金属研究所 > 中国科学院金属研究所

	Design and characterization of selective laser-melted Ti6Al4V-5Cu alloy for dental implants
	Zong, Weian 1,2; Zhang, Song 2; Zhang, Chunhua 2; Ren, Ling 3; Wang, Qiang 1
刊名	MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
	2020-04-15
页码	14
关键词	corrosion resistance dental implants selective laser melting Ti6Al4V-5Cu alloy wear resistance
ISSN号	0947-5117
DOI	10.1002/maco.202011650
通讯作者	Zhang, Song(songzhang_sy@163.com) ; Wang, Qiang(mfqwang@163.com)
英文摘要	Ti6Al4V-5Cu alloys have potential biomedical applications due to their adequate antibacterial properties. However, the wear and corrosion properties of these alloys are also crucial for dental implants. In the present study, Ti6Al4V-5Cu alloys were fabricated by selective laser melting (SLM). The microstructure and composition of Ti6Al4V-5Cu alloys by SLM were evaluated. The wear properties of the alloys in the simulated saliva environment and the atmospheric environment, as well as the electrochemical properties in the simulated saliva environment, were systematically investigated. The results showed that the crystal structure of Ti6Al4V-5Cu alloys was mainly composed of alpha-Ti and Ti2Cu. In the SLM process, no preferred texture was observed due to the complex direction of the heat flux. The formation of Ti2Cu can improve the strength of the material and make the titanium copper alloy have higher microhardness. Ti6Al4V-5Cu alloy showed a satisfactory wear resistance in both wear media. The addition of Cu reduced the second-phase content of the alloy. Meanwhile, the number of microcells was reduced, which was a positive factor to improve the corrosion resistance of the alloys.
资助项目	Shenyang Science and Technology Funded Project[RC190290] ; China Medical University-Shenyang Branch of Chinese Academy of Sciences Scientist Partnership Project[HZHB2018016]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
语种	英语
出版者	WILEY-V C H VERLAG GMBH
WOS记录号	WOS:000526561200001
资助机构	Shenyang Science and Technology Funded Project ; China Medical University-Shenyang Branch of Chinese Academy of Sciences Scientist Partnership Project
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/138337]
专题	金属研究所_中国科学院金属研究所
通讯作者	Zhang, Song; Wang, Qiang
作者单位	1.China Med Univ, Sch & Hosp Stomatol, Shenyang 110001, Liaoning, Peoples R China 2.Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang, Liaoning, Peoples R China
推荐引用方式 GB/T 7714	Zong, Weian,Zhang, Song,Zhang, Chunhua,et al. Design and characterization of selective laser-melted Ti6Al4V-5Cu alloy for dental implants[J]. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,2020:14.
APA	Zong, Weian,Zhang, Song,Zhang, Chunhua,Ren, Ling,&Wang, Qiang.(2020).Design and characterization of selective laser-melted Ti6Al4V-5Cu alloy for dental implants.MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,14.
MLA	Zong, Weian,et al."Design and characterization of selective laser-melted Ti6Al4V-5Cu alloy for dental implants".MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020):14.