CORC  > 金属研究所  > 中国科学院金属研究所
Characterization of porosity and its effect on the tensile properties of Mg-6Gd-3Y-0.5Zr alloy
Zhou, B.1,2; Meng, D. H.3,4; Wu, D.1; Tang, J. F.5; Chen, R. S.1; Li, P. J.3; Han, En-Hou1
刊名MATERIALS CHARACTERIZATION
2019-06-01
卷号152页码:204-212
关键词Mg-Gd-Y-Zr Porosity Tensile properties
ISSN号1044-5803
DOI10.1016/j.matchar.2019.04.021
通讯作者Wu, D.(dwu@imr.ac.cn) ; Chen, R. S.(rschen@imr.ac.cn)
英文摘要Microstructure investigations and static uniaxial tensile tests of Mg-6Gd-3Y-0.5Zr (GW63) alloys containing varied content of porosity were carried out to disclose the relationship between porosity and tensile properties. Here, a qualitative analysis was performed by relating the tensile properties with porosity level, which was relevant to porosity content and assessed by X-ray detector. Besides, both analytical (i.e., critical local strain model) and empirical methods were applied to quantitatively investigate the influence of porosity on tensile properties, based on the projected area of porosity on the fracture surface. The results showed that two types of porosity and three typical regions on the fracture surface were identified. Both ultimate tensile strength (UTS) and elongation-to-failure (EL) decreased with porosity level increasing. Besides, a great scatter of EL of each porosity level was observed. The critical local strain model was testified not applicable for GW63 alloys to calculate the tensile properties. Instead, strong quantitative correlations between tensile properties and porosity area fraction were obtained through the empirical approach.
资助项目National Science and Technology Major Project[2017ZX04014001] ; National Key Research and Development Program of China[2016YFB0301104] ; National Natural Science Foundation of China (NSFC)[51531002] ; National Natural Science Foundation of China (NSFC)[51301173] ; National Natural Science Foundation of China (NSFC)[51601193] ; National Natural Science Foundation of China (NSFC)[51701218] ; Natural Science Foundation of Liaoning Province[20180550799]
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
出版者ELSEVIER SCIENCE INC
WOS记录号WOS:000470041500021
资助机构National Science and Technology Major Project ; National Key Research and Development Program of China ; National Natural Science Foundation of China (NSFC) ; Natural Science Foundation of Liaoning Province
内容类型期刊论文
源URL[http://ir.imr.ac.cn/handle/321006/133782]  
专题金属研究所_中国科学院金属研究所
通讯作者Wu, D.; Chen, R. S.
作者单位1.Chinese Acad Sci, Inst Met Res, Grp Magnesium Alloys & Their Applicat, 62 Wencui Rd, Shenyang 110016, Liaoning, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, 19 Jinzhai Rd, Hefei 230026, Anhui, Peoples R China
3.Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China
4.Beijing Inst Astronaut Syst Engn, Beijing 100076, Peoples R China
5.Nanjing Univ Aeronaut & Astronaut, State Key Lab Mech & Control Mech Struct, Nanjing 210016, Jiangsu, Peoples R China
推荐引用方式
GB/T 7714
Zhou, B.,Meng, D. H.,Wu, D.,et al. Characterization of porosity and its effect on the tensile properties of Mg-6Gd-3Y-0.5Zr alloy[J]. MATERIALS CHARACTERIZATION,2019,152:204-212.
APA Zhou, B..,Meng, D. H..,Wu, D..,Tang, J. F..,Chen, R. S..,...&Han, En-Hou.(2019).Characterization of porosity and its effect on the tensile properties of Mg-6Gd-3Y-0.5Zr alloy.MATERIALS CHARACTERIZATION,152,204-212.
MLA Zhou, B.,et al."Characterization of porosity and its effect on the tensile properties of Mg-6Gd-3Y-0.5Zr alloy".MATERIALS CHARACTERIZATION 152(2019):204-212.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace