Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology

doi:10.1016/j.optlastec.2019.02.001

CORC > 金属研究所 > 中国科学院金属研究所

	Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology
	Li, X.1; Zhang, C. H.1; Zhang, S.1; Wu, C. L.1; Liu, Y.2; Zhang, J. B.2; Shahzad, M. Babar 3
刊名	OPTICS AND LASER TECHNOLOGY
	2019-06-01
卷号	114 页码:209-215
关键词	Laser cladding Co-based alloy Ti3SiC2 Wear resistance
ISSN号	0030-3992
DOI	10.1016/j.optlastec.2019.02.001
通讯作者	Zhang, C. H.(zhangch5858@126.com)
英文摘要	Metal matrix composites (MMCs) self-lubricating coatings were fabricated on 35CrMo steel by laser cladding using Co-based alloy and Ti3SiC2 mixture, aiming at improving the wear resistance of 35CrMo steel. Phase constituents, microstructure, microhardness and wear property of the MMCs coatings with different Ti3SiC2 content were investigated using XRD, SEM, microhardness tester, and friction-wear tester, respectively. Experimental results showed that with appropriate laser processing parameters, crack and porosity-free coatings with good metallurgical bonding to the substrate could be obtained. The coatings were mainly composed of gamma-Co, Ti3SiC2, Cr7C3 and TiC. During the cladding process, Ti3SiC2 partially dissolved to form TiC. The microhardness of the coatings was significantly enhanced, which was at least 2.3 times that of substrate. The wear resistance of the coatings was 3.6-6.2 times that of substrate and the coating with 10 wt% Ti3SiC2 addition possessed the highest wear resistance.
资助项目	National Key Research and Development Program of China[2016YFB1100204] ; Science and Technology Commission of Liaoning Province[2017106036] ; Shenyang Science and Technology Funded Project[Z18-5-012] ; Shenyang Science and Technology Funded Project[18-004-1-16] ; Shenyang Science and Technology Funded Project[18-201-0-02] ; Shenyang Science and Technology Funded Project[17-29-2-00]
WOS研究方向	Optics ; Physics
语种	英语
出版者	ELSEVIER SCI LTD
WOS记录号	WOS:000461535000032
资助机构	National Key Research and Development Program of China ; Science and Technology Commission of Liaoning Province ; Shenyang Science and Technology Funded Project
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/132295]
专题	金属研究所_中国科学院金属研究所
通讯作者	Zhang, C. H.
作者单位	1.Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China 2.Shenyang Dalu Laser Technol CO LTD, Shenyang 110136, Liaoning, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China
推荐引用方式 GB/T 7714	Li, X.,Zhang, C. H.,Zhang, S.,et al. Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology[J]. OPTICS AND LASER TECHNOLOGY,2019,114:209-215.
APA	Li, X..,Zhang, C. H..,Zhang, S..,Wu, C. L..,Liu, Y..,...&Shahzad, M. Babar.(2019).Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology.OPTICS AND LASER TECHNOLOGY,114,209-215.
MLA	Li, X.,et al."Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology".OPTICS AND LASER TECHNOLOGY 114(2019):209-215.