Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling

doi:10.32604/jrm.2020.010544

CORC > 宁波材料技术与工程研究所 > 中国科学院宁波材料技术与工程研究所 > 2020专题

	Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling
	Wang, Ling; Jiang, Shenglong; Huang, Chenchen; Dai, Pengyuan; Liu, Fenghua; Qi, Xiaopeng; Xu, Gaojie
刊名	JOURNAL OF RENEWABLE MATERIALS
	2020
卷号	8 期号:11 页码:1505-1518
关键词	MECHANICAL-PROPERTIES CARBON-FIBER COMPOSITES MORPHOLOGY PROMISES
DOI	10.32604/jrm.2020.010544
英文摘要	The paper discusses the mechanical and thermal performance manifested in natural nanorods attapulgite (ATP) reinforced Acrylonitrile butadiene styrene (ABS) nanocomposites in the process of fused deposition modeling (FDM). Molten extrusion technique was taken to manufacture the filaments of ABS/ organic-attapulgite ( OAT) nanocomposites with different mass fraction and the printing operation was made by one commercial FDM three-dimensional (3D) printer. Results indicate that the mechanical performance of these FDM 3D printed specimens are improved obviously via the introduction of OAT, and tensile strength of the ABS/OAT nanocomposites parts with only 2 wt% OAT addition is enhanced by 48.1%. At the same time, the addition OAT can reduce the linear expansion coefficient and creep flexibility, and improve the thermal stability and dimensional accuracy of these FDM 3D printed parts.
学科主题	Science & Technology - Other Topics ; Materials Science ; Polymer Science
内容类型	期刊论文
源URL	[http://ir.nimte.ac.cn/handle/174433/20250]
专题	2020专题
作者单位	Liu, FH (corresponding author), Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Key Lab Addit Mfg Mat Zhejiang Prov, Ningbo 315201, Peoples R China.
推荐引用方式 GB/T 7714	Wang, Ling,Jiang, Shenglong,Huang, Chenchen,et al. Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling[J]. JOURNAL OF RENEWABLE MATERIALS,2020,8(11):1505-1518.
APA	Wang, Ling.,Jiang, Shenglong.,Huang, Chenchen.,Dai, Pengyuan.,Liu, Fenghua.,...&Xu, Gaojie.(2020).Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling.JOURNAL OF RENEWABLE MATERIALS,8(11),1505-1518.
MLA	Wang, Ling,et al."Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling".JOURNAL OF RENEWABLE MATERIALS 8.11(2020):1505-1518.