Research on the influence of traditional laser shock process machining path | |
Yang H(杨灏)1,2; Zhao JB(赵吉宾)2; Sun BY(孙博宇)2; Wang TR(王天然)2 | |
刊名 | Optik |
2020 | |
卷号 | 203页码:1-5 |
关键词 | Laser shock process Traditional machining path Stress distribute Overlap rate |
ISSN号 | 0030-4026 |
产权排序 | 1 |
英文摘要 | In most laser shock process experiments, the traditional typical laser path is usually in use. The traditional typical laser path is easy to control the laser beam and the multi-axis machining platform, effective to improve the material surface properties. The traditional laser path moves from the start point and goes through straight line and turn back in the next row then continue to full fill the machining area. However, the surface stress distribute is unbalance. The material surface would be destroyed when the outside stress larger than limit of any axis. To make the stress distribution more reasonable, the manuscript discuss the reasons caused the phenomenon. © 2019 Elsevier GmbH |
语种 | 英语 |
资助机构 | National Natural Science Foundation of China(NSFC) (No. U1608259) ; National Key Technology R&D Program of China (2015BAF08B01) |
内容类型 | 期刊论文 |
源URL | [http://ir.sia.cn/handle/173321/26037] |
专题 | 工艺装备与智能机器人研究室 |
通讯作者 | Yang H(杨灏) |
作者单位 | 1.University of Chinese Academy of ScieNces, Beijing 100049, China 2.Shenyang Institute of Automation Chinese Academy of Sciences, Shenyang 110000, China |
推荐引用方式 GB/T 7714 | Yang H,Zhao JB,Sun BY,et al. Research on the influence of traditional laser shock process machining path[J]. Optik,2020,203:1-5. |
APA | Yang H,Zhao JB,Sun BY,&Wang TR.(2020).Research on the influence of traditional laser shock process machining path.Optik,203,1-5. |
MLA | Yang H,et al."Research on the influence of traditional laser shock process machining path".Optik 203(2020):1-5. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论