Ti-6Al-4V和Monel K500合金在海水环境中与316不锈钢对磨时的腐蚀磨损性能(英文)

CORC > 兰州化学物理研究所 > 中国科学院兰州化学物理研究所 > 固体润滑国家重点实验室

	Ti-6Al-4V和Monel K500合金在海水环境中与316不锈钢对磨时的腐蚀磨损性能(英文)
	Chen J(陈君)1,2; Yan FY(阎逢元)1
刊名	Transactions of Nonferrous Metals Society of China
	2012
卷号	22 期号:6 页码:1356-1365
关键词	Ti-6Al-4V alloy Monel K500 alloy seawater tribocorrosion synergism effect Ti-6Al-4V合金 Monel K500合金海水腐蚀磨损交互作用
ISSN号	1003-6326
通讯作者	阎逢元
中文摘要	研究Ti-6Al-4V和Monel K500合金在海水和纯水环境下的腐蚀磨损性能,对偶材料为316不锈钢,实验装置为环-块摩擦磨损试验机。研究结果表明, Ti-6Al-4V和Monel K500合金在海水中的摩擦因数明显小于在纯水中的摩擦因数, 在海水中的磨损量明显大于纯水中的磨损量,这主要是由于摩擦作用破坏了金属表面的钝化膜,增加了摩蚀速度。磨损和腐蚀产生交互作用, 交互作用量随着腐蚀速度的加快而增加。当和Monel K500配副时, 316不锈钢的磨损严重, 而和Ti-6Al-4V配副时磨损相对较小。
英文摘要	The tribocorrosion behaviors of Ti-6Al-4V and Monel K500 alloys sliding against 316 stainless steel were investigated using a ring-on-block test rig in both artificial seawater and distilled water. It is found that friction coefficients are in general larger in distilled water compared with seawater. The wear losses of Ti-6Al-4V and Monel K500 alloys are larger in seawater compared with distilled water. The mechanical action can destroy the passive film and increase the corrosion rate. The synergism effect between corrosion and wear occurs. The synergism action between corrosion and wear is related to the corrosion rate and with the increase of corrosion rate, the synergism becomes more important. 316 stainless steel suffers severe wear sliding against Monel K500 alloy compared with sliding against Ti-6Al-4V alloy in both distilled water and seawater.
学科主题	材料科学与物理化学
收录类别	SCI
资助信息	Project (50823008) supported by the National Natural Science Foundation of China;Project (2009AA03Z105) supported by the High-tech Research and Development Program of China
语种	英语
WOS记录号	WOS:000306275100014
公开日期	2013-07-12
内容类型	期刊论文
源URL	[http://210.77.64.217/handle/362003/3477]
专题	兰州化学物理研究所_固体润滑国家重点实验室
作者单位	1.中国科学院兰州化学物理研究所,固体润滑国家重点实验室 2.中国科学院研究生院
推荐引用方式 GB/T 7714	Chen J(陈君),Yan FY(阎逢元). Ti-6Al-4V和Monel K500合金在海水环境中与316不锈钢对磨时的腐蚀磨损性能(英文)[J]. Transactions of Nonferrous Metals Society of China,2012,22(6):1356-1365.
APA	Chen J,&Yan FY.(2012).Ti-6Al-4V和Monel K500合金在海水环境中与316不锈钢对磨时的腐蚀磨损性能(英文).Transactions of Nonferrous Metals Society of China,22(6),1356-1365.
MLA	Chen J,et al."Ti-6Al-4V和Monel K500合金在海水环境中与316不锈钢对磨时的腐蚀磨损性能(英文)".Transactions of Nonferrous Metals Society of China 22.6(2012):1356-1365.