QQ客服 官方微博 反馈留言

	Design and test of pointing mirror assembly for spaceborne remote sensing camera (EI CONFERENCE)
	Chen W. ; Ding Y. ; Hui S.
	2011
会议名称	2011 International Conference on Electronics, Communications and Control, ICECC 2011, September 9, 2011 - September 11, 2011
会议地点	Ningbo, China
关键词	In order to ensure the surface figure of the pointing mirror (460mm long 290mm wide) in spaceborne remote sensing camera Silicon Carbide was selected as the mirror material. The form of composite triangular and rectangular and the combination of open and closed back was explored in the lightweight design. A new kinematic mount and flexible structure in axis is used to hold the mirror around the lateral surface. The structure can minimize distortions induced by coefficient of thermal expansion mismatch among the materials. This eliminates the bending of the integral mount under the weight of the mirror. Optical performance of the mirror was analyzed under gravity load and temperature load using finite element method. Predicted surface figure error based on the removal of bias tilt and power was calculated using an in-house Matlab script for mirrors. The pointing mirror assembly was tested using open loop servo control. And the surface figure was checked using interferometer. Surface figure accuracy is better than 1/30 ( 632.8nm rms). The results show that the kinematic mount induces minimal figure error on the optical surface. 2011 IEEE.
页码	1996-1999
收录类别	EI
内容类型	会议论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/33112]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式 GB/T 7714	Chen W.,Ding Y.,Hui S.. Design and test of pointing mirror assembly for spaceborne remote sensing camera (EI CONFERENCE)[C]. 见:2011 International Conference on Electronics, Communications and Control, ICECC 2011, September 9, 2011 - September 11, 2011. Ningbo, China.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。