Effect of coatings on oxidation resistance and mechanical performance of Ti60 alloy

CORC > 金属研究所 > 中国科学院金属研究所

	Effect of coatings on oxidation resistance and mechanical performance of Ti60 alloy
	Z. L. Tang ; F. H. Wang ; W. T. Wu ; Q. J. Wang ; D. Li
刊名	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
	1998
卷号	255 期号:1-2 页码:133-138
关键词	Ti-60 alloy oxidation oxygen-barrier coating mechanical properties titanium
ISSN号	0921-5093
中文摘要	The effect of several sputtered coatings on oxidation resistance and mechanical performance of Ti60 alloy was investigated. Sputtered pure Al, Ti-36Al, Ni-16Cr-2.5Al(wt%) coatings and reactively-sputtered Al2O3 film were effective in inhibiting the oxidation and oxygen-embrittlement of Ti60 alloy at 600-700 degrees C, while Al2O3 and TiAl coatings exhibited a better effect than Al and NiCrAl coatings from the point of view of coating-substrate compatibility. The tensile test after 100h exposure at 600 degrees C in air also showed that Ti60 alloy with Al2O3 and TiAl coatings exhibited a higher ductility than that with Al and NiCrAl coatings, which exhibited a good correlation with coating-substrate compatibility. (C) 1998 Elsevier Science S.A. All rights reserved.
原文出处	://WOS:000076726500018
公开日期	2012-04-14
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/37792]
专题	金属研究所_中国科学院金属研究所
推荐引用方式 GB/T 7714	Z. L. Tang,F. H. Wang,W. T. Wu,et al. Effect of coatings on oxidation resistance and mechanical performance of Ti60 alloy[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,1998,255(1-2):133-138.
APA	Z. L. Tang,F. H. Wang,W. T. Wu,Q. J. Wang,&D. Li.(1998).Effect of coatings on oxidation resistance and mechanical performance of Ti60 alloy.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,255(1-2),133-138.
MLA	Z. L. Tang,et al."Effect of coatings on oxidation resistance and mechanical performance of Ti60 alloy".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 255.1-2(1998):133-138.