High-performance bulk Ti-Cu-Ni-Sn-Ta nanocomposites based on a dendrite-eutectic microstructure | |
Q. L. Dai ; B. B. Sun ; M. L. Sui ; G. He ; Y. Li ; J. Eckert ; W. K. Luo ; E. Ma | |
刊名 | Journal of Materials Research
![]() |
2004 | |
卷号 | 19期号:9页码:2557-2566 |
关键词 | enhanced plasticity amorphous-alloys cooling rate composite solidification powders growth |
ISSN号 | 0884-2914 |
中文摘要 | Using a Ti-Cu-Ni-Sn-Ta alloy as an example, we demonstrate a strategy for the in situ formation of nanocomposite microstructures that can lead to simultaneous high strength and ductility. Our approach employs copper mold casting for the production of bulk alloys from the melt, and the solidification microstructure is designed to be composed of micrometer-sized ductile dendrites uniformly distributed inside a matrix of nanoscale eutectic reaction products. The nanostructured matrix is achieved at a relatively deep eutectic, which facilitates the formation of an ultrafine eutectic microstructure over a range of cooling rates. The multi-component recipe stabilizes a ductile solid solution as the toughening phase and helps to reduce the eutectic spacing down to nanoscale. The multi-phase microstructure (including phase distributions, morphologies, and interfaces) has been examined in detail using transmission electron microscopy (TEM) and high-resolution TEM. The metastable eutectic reaction and the nanoscale spacing achieved are explained using thermodynamic and solidification modeling. The benefits expected from the microstructure design are illustrated using the high strength and large plasticity observed in mechanical property tests. Our nanocomposite design strategy is expected to be applicable to many alloy systems and constitutes another example of tailoring the microstructure on nanoscale for extraordinary properties. |
原文出处 | |
公开日期 | 2012-04-14 |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/35337] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Q. L. Dai,B. B. Sun,M. L. Sui,et al. High-performance bulk Ti-Cu-Ni-Sn-Ta nanocomposites based on a dendrite-eutectic microstructure[J]. Journal of Materials Research,2004,19(9):2557-2566. |
APA | Q. L. Dai.,B. B. Sun.,M. L. Sui.,G. He.,Y. Li.,...&E. Ma.(2004).High-performance bulk Ti-Cu-Ni-Sn-Ta nanocomposites based on a dendrite-eutectic microstructure.Journal of Materials Research,19(9),2557-2566. |
MLA | Q. L. Dai,et al."High-performance bulk Ti-Cu-Ni-Sn-Ta nanocomposites based on a dendrite-eutectic microstructure".Journal of Materials Research 19.9(2004):2557-2566. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论