The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters

CORC > 金属研究所 > 中国科学院金属研究所

	The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters
	G. X. Sui ; S. C. Wong ; R. Yang ; C. Y. Yue
刊名	Composites Science and Technology
	2005
卷号	65 期号:2 页码:221-229
关键词	glass fiber nylon 6 6 reinforced polymers glass strength behavior microstructures thermoplastics
ISSN号	0266-3538
中文摘要	Short glass fiber-reinforced nylon 6,6 with and without rubbery inclusions were injection molded into standard specimens. The mechanical properties and the residual fiber length distribution were measured. The macro-to-micro model proposed by Bowyer and Bader [J. Mater. Sci., 7 (1972) 1315] was used to determine the interfacial shear strength (IFSS). The IFSS in the toughened nylon 6,6-based composites was found to be superior to that in the untoughened nylon 6,6-based composites. This indicates that the presence of rubbery phase in the composite system contributed to the interfacial bonding between nylon 6,6 and glass fibers (GF). Back-scattered electron imaging taken on a plane perpendicular to the mold filling direction for fiber-reinforced toughened nylon 6,6 showed that the rubbery phase adhered to the GF surface. This morphological feature was regarded as a main factor responsible for the improvement of IFSS in the reinforced toughened nylon 6,6 composites. (C) 2004 Published by Elsevier Ltd.
原文出处	://WOS:000225541700006
公开日期	2012-04-14
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/35037]
专题	金属研究所_中国科学院金属研究所
推荐引用方式 GB/T 7714	G. X. Sui,S. C. Wong,R. Yang,et al. The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters[J]. Composites Science and Technology,2005,65(2):221-229.
APA	G. X. Sui,S. C. Wong,R. Yang,&C. Y. Yue.(2005).The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters.Composites Science and Technology,65(2),221-229.
MLA	G. X. Sui,et al."The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters".Composites Science and Technology 65.2(2005):221-229.