Interface structure and mechanical properties of Ti(C,N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-2

CORC > 金属研究所 > 中国科学院金属研究所

	Interface structure and mechanical properties of Ti(C,N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-2
	F. Z. Wang ; Q. Z. Wang ; B. H. Yu ; B. L. Xiao ; Z. Y. Ma
刊名	Journal of Materials Processing Technology
	2011
卷号	211 期号:11 页码:1804-1809
关键词	Brazing Ti(C N)-based cermet Steel Microstructure Mechanical properties isothermal solidification
ISSN号	0924-0136
中文摘要	The effects of brazing temperature on microstructure and bonding strength of vacuum brazed joints of Ti(C,N)-based cermet and 17-4 PH stainless steel, using filler metal BNi-2, were investigated. At a lower brazing temperature of 1050 C. the distribution of melting point depressants (MPD) concentrated on the diffusion affected zone (DAZ) and the brazing seam near the Ti(C,N)-based cermet, the generation of brittle phases in the brazing seam was unavoidable. The uniform distribution of the MPD and full solid solution of gamma-nickel occurred in the brazing seam at a higher brazing temperature of 1150 degrees C. A maximum shear strength of 690 MPa was achieved at a brazing temperature of 1150 degrees C. (C) 2011 Elsevier B.V. All rights reserved.
原文出处	://WOS:000294511700019
公开日期	2012-04-13
内容类型	期刊论文
源URL	[http://210.72.142.130/handle/321006/30717]
专题	金属研究所_中国科学院金属研究所
推荐引用方式 GB/T 7714	F. Z. Wang,Q. Z. Wang,B. H. Yu,et al. Interface structure and mechanical properties of Ti(C,N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-2[J]. Journal of Materials Processing Technology,2011,211(11):1804-1809.
APA	F. Z. Wang,Q. Z. Wang,B. H. Yu,B. L. Xiao,&Z. Y. Ma.(2011).Interface structure and mechanical properties of Ti(C,N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-2.Journal of Materials Processing Technology,211(11),1804-1809.
MLA	F. Z. Wang,et al."Interface structure and mechanical properties of Ti(C,N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-2".Journal of Materials Processing Technology 211.11(2011):1804-1809.