Magnet prototypes for CSRm injection beam line | |
Wang, Y; He, RR; Han, SF; Ma, LZ; Zhang, B; He, Y; Xiong, H; Liu, WJ; Yuan, P; Zhan, WL | |
2002-03 | |
会议日期 | SEP 24-28, 2001 |
会议地点 | GENEVA, SWITZERLAND |
关键词 | Air Slots Integral Field Distribution Remounted Pole Ends And Higher Order Contributions |
卷号 | 12 |
期号 | 1 |
页码 | 325-328 |
英文摘要 | The magnet in the beam line injection from a Separate Sector Cyclotron (SSC) to Cooling Storage Ring (CSR) was selected as CSR magnet fabrication's R&D. A method to obtain good field homogeneity was attempted in a C type dipole prototype. This method is not enlarged the dipole gap and need only two different very smaller power supply and easy operated and little cost. Because the C type dipole prototypes have a larger bending angle and smaller radius, it is very difficulty to stack and fabrication. The quadrupole prototype in the CSRm injection beam line is four fold assembly quadrupole. Its coils were made with a special vacuum epoxy impregnation technology, which is not necessary to use the complicated and expensive impregnating mold. Its maximum pole tip field was designed to reach near 10 000 Gs. All prototypes' fabrication and field measurement results will be present in detailed in this, paper. |
会议录 | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY |
会议录出版者 | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC |
会议录出版地 | 345 E 47TH ST, NEW YORK, NY 10017-2394 USA |
语种 | 英语 |
WOS研究方向 | Engineering ; Physics |
WOS记录号 | WOS:000176908600068 |
内容类型 | 会议论文 |
源URL | [http://119.78.100.186/handle/113462/58148] |
专题 | 近代物理研究所_兰州重离子研究装置 近代物理研究所_实验物理中心 |
作者单位 | Chinese Acad Sci, Inst Modern Phys, Lanzhou 730000, Peoples R China |
推荐引用方式 GB/T 7714 | Wang, Y,He, RR,Han, SF,et al. Magnet prototypes for CSRm injection beam line[C]. 见:. GENEVA, SWITZERLAND. SEP 24-28, 2001. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论