Design, fabrication and performance of taper cavity cryomodule for ADS Injector II

doi:10.1016/j.nima.2018.05.074

	Design, fabrication and performance of taper cavity cryomodule for ADS Injector II
	Bai, Feng1,2 ; Zhang, Jun-Hui 1; Hu, Chuan-Fei 1,2; Wan, Yu-Qin1 ; Niu, Xiao-Fei1 ; Han, Yan-Ning1 ; Zhang, Peng 1; Zhao, Yu-Gang1 ; Ma, Li-zhen1
刊名	NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
	2018-09-21
卷号	903 页码:70-76
关键词	ADS linac SRF Cryomodule Heat load Pressure fluctuation
ISSN号	0168-9002
DOI	10.1016/j.nima.2018.05.074
英文摘要	A beta = 0.15 taper cavity cryomodule was designed for the China Accelerator Driven Sub-critical System Injector II(ADS) at the Institute of Modern Physics (IMP) of the Chinese Academy of Science (CAS). This cryomodule is the third cryomodule of the ADS Linac and contains five beta = 0.15 taper cavities and five 5.5 T solenoids that operate at 4.2 K and 1.05 Bar. Manufacturing of the cryomodule and construction of the cold mass was finished at the beginning of 2017. The cryomodule assembly was completed at the end of March, 2017. The ADS Injector II linac accelerated a 10 mA proton beam to 25 MeV in June of 2017. This paper reports the design, fabrication and performance of this taper cavity cryomodule.
资助项目	CAS[Y617020YRC]
WOS关键词	CURRENT LEADS
WOS研究方向	Instruments & Instrumentation ; Nuclear Science & Technology ; Physics
语种	英语
出版者	ELSEVIER SCIENCE BV
WOS记录号	WOS:000444422200009
内容类型	期刊论文
源URL	[http://119.78.100.186/handle/113462/59690]
专题	中国科学院近代物理研究所
作者单位	1.Chinese Acad Sci, Inst Modern Phys, Lanzhou 730000, Gansu, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China
推荐引用方式 GB/T 7714	Bai, Feng,Zhang, Jun-Hui,Hu, Chuan-Fei,et al. Design, fabrication and performance of taper cavity cryomodule for ADS Injector II[J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT,2018,903:70-76.
APA	Bai, Feng.,Zhang, Jun-Hui.,Hu, Chuan-Fei.,Wan, Yu-Qin.,Niu, Xiao-Fei.,...&Ma, Li-zhen.(2018).Design, fabrication and performance of taper cavity cryomodule for ADS Injector II.NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT,903,70-76.
MLA	Bai, Feng,et al."Design, fabrication and performance of taper cavity cryomodule for ADS Injector II".NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT 903(2018):70-76.