CORC  > 北京大学  > 信息科学技术学院
Improving the Accuracy of Time-Difference Measurement by Reducing the Impact of Baseline Shift
Zhang, Yang ; Li, Zhaohui
刊名IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
2015
关键词Baseline shift double-edge method time-difference measurement triple-edge method ultrasonic flow measurement TO-DIGITAL CONVERTER RESOLUTION
DOI10.1109/TIM.2015.2437635
英文摘要Many time-difference measurement devices such as time-to-digital converters (TDCs) are designed on the basis of threshold or zero cross detection technology. However, baseline shift, which means that the detected signals may have a shift of amplitude of the whole signal, is common in electronic circuits and has a great influence on the accuracy and stability of the time-difference measured with conventional posedge or negedge detection methods. In general, the baseline shifts can be classified into two cases which are parallel and oblique baseline shifts according to their different origins. Parallel baseline shift means that the baselines of two detected signals are parallel but in different levels, while oblique baseline shift is that the baselines of two detected signals are not parallel and the baselines have a nearly linear relationship with the time in the duration of signals. In this paper, detection methods using multiple edges, namely, double-edge and triple-edge methods, are proposed to reduce the impact of relative baseline shift between two signals for high-precision time-difference measurement because they require more information of the signal waveforms than conventional methods. The simulation results show that the proposed methods have a better performance than conventional posedge or negedge method. The experiment results based on a TDC chip, i.e., TDC-GP21, also demonstrate the validity of proposed methods when baseline shifts exist.; SCI(E); EI; ARTICLE; yangzhang08@163.com; lizhcat@pku.edu.cn; 11; 3013-3020; 64
语种英语
内容类型期刊论文
源URL[http://ir.pku.edu.cn/handle/20.500.11897/415469]  
专题信息科学技术学院
推荐引用方式
GB/T 7714
Zhang, Yang,Li, Zhaohui. Improving the Accuracy of Time-Difference Measurement by Reducing the Impact of Baseline Shift[J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT,2015.
APA Zhang, Yang,&Li, Zhaohui.(2015).Improving the Accuracy of Time-Difference Measurement by Reducing the Impact of Baseline Shift.IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT.
MLA Zhang, Yang,et al."Improving the Accuracy of Time-Difference Measurement by Reducing the Impact of Baseline Shift".IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2015).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace