Cavitation Erosion and Jet Impingement Erosion Behavior of the NiTi Coating Produced by Air Plasma Spraying

doi:10.3390/coatings8100346

CORC > 金属研究所 > 中国科学院金属研究所

	Cavitation Erosion and Jet Impingement Erosion Behavior of the NiTi Coating Produced by Air Plasma Spraying
	Shi, ZP ; Wang, JQ ; Wang, ZB ; Qiao, YX ; Xiong, TY ; Zheng, YG
刊名	COATINGS
	2018-10-01
卷号	8 期号:10 页码:-
关键词	NiTi coating cavitation erosion jet impingement erosion air plasma spraying
ISSN号	2079-6412
DOI	10.3390/coatings8100346
英文摘要	Cavitation erosion and jet impingement erosion can result in a great loss of materials. NiTi alloy is a very promising candidate to acquire cavitation erosion resistance and jet impingement erosion resistance because of its superelasticity. Due to the high cost and poor workability of NiTi alloy, many people tried to overcome such drawbacks by preparing NiTi coatings on the basis of deteriorating the good properties as little as possible. From the aspect of the application of NiTi coating, the erosion resistance should be evaluated comprehensively. One of these evaluations involves the comparison of cavitation erosion resistance and jet impingement erosion resistance of NiTi. This evaluation has not been made thus far. Thus, in this study, the NiTi coating was prepared by air plasma spraying (APS) using pre-alloyed NiTi powder. Its microstructure, chemical composition and phase transformation were identified. Cavitation erosion behavior and jet impingement erosion behavior of the as-sprayed NiTi coating were compared. The results showed that the coating exhibited better jet impingement erosion resistance than cavitation erosion resistance. This was attributed to the oxides, impurities, cracks and pores that existed in the coating, whose effects on deteriorating the cavitation erosion were far greater than those worsening the jet impingement erosion.
学科主题	Materials Science, Coatings & Films
语种	英语
WOS记录号	WOS:000448545400018
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/79911]
专题	金属研究所_中国科学院金属研究所
作者单位	1.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, 62 Wencui Rd, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, 62 Wencui Rd, Shenyang 110016, Liaoning, Peoples R China 3.Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang 212003, Peoples R China
推荐引用方式 GB/T 7714	Shi, ZP,Wang, JQ,Wang, ZB,et al. Cavitation Erosion and Jet Impingement Erosion Behavior of the NiTi Coating Produced by Air Plasma Spraying[J]. COATINGS,2018,8(10):-.
APA	Shi, ZP,Wang, JQ,Wang, ZB,Qiao, YX,Xiong, TY,&Zheng, YG.(2018).Cavitation Erosion and Jet Impingement Erosion Behavior of the NiTi Coating Produced by Air Plasma Spraying.COATINGS,8(10),-.
MLA	Shi, ZP,et al."Cavitation Erosion and Jet Impingement Erosion Behavior of the NiTi Coating Produced by Air Plasma Spraying".COATINGS 8.10(2018):-.