Microstructure and mechanical properties of mg-6al4re-0.4mn alloy | |
Wang Jian-li; Peng Qiu-ming; Wu Yao-ming; Wang Li-min | |
刊名 | Transactions of nonferrous metals society of china |
2006-12-01 | |
卷号 | 16页码:S1703-s1707 |
关键词 | Mg-al-re alloy Casting Heat treatment Microstructure Mechanical property |
ISSN号 | 1003-6326 |
通讯作者 | Wang li-min(lmwang@ciac.jl.cn) |
英文摘要 | Mg-6al-4re-0.4mn (mass fraction, %, re=ce rich mischmetal) alloy was prepared by steel mould casting technique. solid solution and artificial aging (t6) were carried out. the microstructure and mechanical properties of both as-cast and t6 treated alloys were investigated at room temperature and 423 k. it is found that the intermetallic compounds of the as-cast and t6 treated alloys were mainly composed of al11re3, mg17al12 and a(16)remn(6). the vickers hardness (hv) of the as-cast alloy is 63 and it increases to 70 after t6 heat treatment. t6 heat treatment plays a slight role in the tensile properties at room temperature, but the yield strength and elongation of t6 state at 423 k are distinctly improved. the yield strength and elongation of the as-east alloy at 423 k are 71 mpa and 18%, respectively, and the values increase after t6 heat treatment, which is attributed to al11re3, mg17al12 and al6rf-mn-6 precipitates that impede the dislocation movement and gliding of grain boundaries effectively. |
WOS关键词 | RARE-EARTH ADDITIONS ; MAGNESIUM ALLOYS ; BEHAVIOR ; CREEP |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
WOS类目 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | ALLERTON PRESS INC |
WOS记录号 | WOS:000244524400105 |
内容类型 | 期刊论文 |
URI标识 | http://www.corc.org.cn/handle/1471x/2378557 |
专题 | 中国科学院大学 |
通讯作者 | Wang Li-min |
作者单位 | 1.Chinese Acad Sci, Changchun Inst Appl Chem, Key Lab Rare Earth Chem & Phys, Changchun 130022, Peoples R China 2.Chinese Acad Sci, Grad Sch, Beijing 100049, Peoples R China |
推荐引用方式 GB/T 7714 | Wang Jian-li,Peng Qiu-ming,Wu Yao-ming,et al. Microstructure and mechanical properties of mg-6al4re-0.4mn alloy[J]. Transactions of nonferrous metals society of china,2006,16:S1703-s1707. |
APA | Wang Jian-li,Peng Qiu-ming,Wu Yao-ming,&Wang Li-min.(2006).Microstructure and mechanical properties of mg-6al4re-0.4mn alloy.Transactions of nonferrous metals society of china,16,S1703-s1707. |
MLA | Wang Jian-li,et al."Microstructure and mechanical properties of mg-6al4re-0.4mn alloy".Transactions of nonferrous metals society of china 16(2006):S1703-s1707. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论