Solids surface characterization using computational algorithms: A case study for talc fillers

doi:10.1016/j.clay.2017.02.027

CORC > 广州能源研究所 > 中国科学院广州能源研究所 > 中国科学院广州能源研究所

	Solids surface characterization using computational algorithms: A case study for talc fillers
	Yao, Zhitong 1; Wu, Daidai 2; Heng, Jerry Y. Y.3; Wu, Weihong 1; Zhao, Hongting 1; Liu, Jie 1; Tang, Junhong 1
刊名	APPLIED CLAY SCIENCE
	2017-06-01
卷号	141 页码:212-218
关键词	Talc Filler Surface Property Polymer Computational Algorithm
DOI	10.1016/j.clay.2017.02.027
文献子类	Article
英文摘要	The solid surface characterization using contact angle measurement is complicated and time-consuming. In this work, two computational algorithms in MATLAB and C were developed and validated by the surface properties determination of talc filler (TCF) and colored talc filler (CTCF). The results indicated that, the surface free energy parameters calculated using the two algorithms for both samples were consistent. As compared to the MATLAB function, the assembly statements of C function were longer, although the unknowns can be directly obtained using this toolbox. The gamma(D)(S) values determined by the Owens-Wendt-Kaelble (OWK), van Oss-Chaudhury-Good (vOCG) and Wu methods were consistent and contributed a major part of the gamma(T)(s)Compared to gamma(D)(S), the gamma(SP)(s) component contributed less toys implying a lower polarity for both samples. The lower y(S)(D) and gamma(SP)(S) for CTCF added up to a lower gamma(T)(S) value, which could reduce filler particle-particle interactions. The mechanical properties study of acrylonitrile-butadiene-styrene (ABS) matrix filled with the two fillers showed that the incorporation of them played mainly a reinforcing role, and a better performance for CTCF was observed. (C) 2017 Elsevier B.V. All rights reserved.
WOS关键词	INVERSE GAS-CHROMATOGRAPHY ; CONTACT-ANGLE ; FREE-ENERGY ; TENSION ; POLYMERS ; SYSTEMS ; POWDERS
语种	英语
WOS记录号	WOS:000399846400025
资助机构	National Natural Science Foundation of China(51606055 ; Zhejiang Provincial Natural Science Foundation of China(LY14D010009) ; 41271249)
内容类型	期刊论文
源URL	[http://ir.giec.ac.cn/handle/344007/14172]
专题	中国科学院广州能源研究所
作者单位	1.Hangzhou Dianzi Univ, Coll Mat Sci & Environm Engn, Hangzhou 310018, Zhejiang, Peoples R China 2.Chinese Acad Sci, GuangZhou Inst Energy Convers, Guangzhou 510640, Guangdong, Peoples R China 3.Imperial Coll London, Dept Chem Engn, South Kensington Campus, London SW7 2AZ, England
推荐引用方式 GB/T 7714	Yao, Zhitong,Wu, Daidai,Heng, Jerry Y. Y.,et al. Solids surface characterization using computational algorithms: A case study for talc fillers[J]. APPLIED CLAY SCIENCE,2017,141:212-218.
APA	Yao, Zhitong.,Wu, Daidai.,Heng, Jerry Y. Y..,Wu, Weihong.,Zhao, Hongting.,...&Tang, Junhong.(2017).Solids surface characterization using computational algorithms: A case study for talc fillers.APPLIED CLAY SCIENCE,141,212-218.
MLA	Yao, Zhitong,et al."Solids surface characterization using computational algorithms: A case study for talc fillers".APPLIED CLAY SCIENCE 141(2017):212-218.