Determination of boron concentration in uranium fuel samples by ICP-OES following a separation step by cation exchange resin

doi:10.1007/s41365-018-0374-4

CORC > 上海应用物理研究所 > 中国科学院上海应用物理研究所 > 中科院上海应用物理研究所2011-2017年

	Determination of boron concentration in uranium fuel samples by ICP-OES following a separation step by cation exchange resin
	Luo, Y ; Cong, HX ; Cui, RR ; Cao, CQ ; Zhou, W ; Zhao, ZQ
刊名	NUCLEAR SCIENCE AND TECHNIQUES
	2018
卷号	29 期号:3 页码:-
关键词	Plasma-mass Spectrometry Atomic-absorption-spectrometry Ion-exchange Emission-spectrometry Trace Amounts Water Mannitol Complex Acid Spectrophotometry
ISSN号	1001-8042
DOI	10.1007/s41365-018-0374-4
文献子类	期刊论文
英文摘要	The boron content of uranium fuel samples with boron concentrations in the range of 0.05-10 mu g/g was determined using inductively coupled plasma optical emission spectrometry (ICP-OES) after the uranium was separated by cation exchange. The samples were dissolved in 3 M HNO3 on a hot plate at 150 degrees C and evaporated to near dryness. The residues were redissolved in 0.2 M HNO3 and passed through a column loaded with Dowex 50WX8-400 resin. Uranium was adsorbed on the resin, while boron was easily eluted with 0.2 M HNO3. The boron content of the effluent was determined using ICP-OES. Several strategies were employed to improve the reliability of the experimentally determined boron content. The addition of mannitol and proper control of the evaporation process were shown to be effective in preventing boron loss during sample dissolution and evaporation. The memory effect was eliminated by flushing the system with 1.5% ammonia for 30 s between successive sample runs, and the matrix match method was used to eliminate the matrix effect arising from mannitol during the ICP-OES analysis. The accuracy of the results of the analysis was determined by addition recovery tests and by comparison with the results of three Chinese certified reference materials (GBW04242, GBW04243, and GBW04232). Using the method we developed, the limit of detection for boron was as low as 0.05 mu g/g in uranium fuel samples, and the relative standard deviations for 0.1-0.5 g uranium samples with 0.05-2 mu g/g of boron were within 9%.
语种	英语
WOS记录号	WOS:000428976900014
内容类型	期刊论文
源URL	[http://ir.sinap.ac.cn/handle/331007/28964]
专题	上海应用物理研究所_中科院上海应用物理研究所2011-2017年
作者单位	1.Luo, Y 2.Cong, HX 3.Cui, RR 4.Cao, CQ 5.Zhou, W 6.Zhao, ZQ
推荐引用方式 GB/T 7714	Luo, Y,Cong, HX,Cui, RR,et al. Determination of boron concentration in uranium fuel samples by ICP-OES following a separation step by cation exchange resin[J]. NUCLEAR SCIENCE AND TECHNIQUES,2018,29(3):-.
APA	Luo, Y,Cong, HX,Cui, RR,Cao, CQ,Zhou, W,&Zhao, ZQ.(2018).Determination of boron concentration in uranium fuel samples by ICP-OES following a separation step by cation exchange resin.NUCLEAR SCIENCE AND TECHNIQUES,29(3),-.
MLA	Luo, Y,et al."Determination of boron concentration in uranium fuel samples by ICP-OES following a separation step by cation exchange resin".NUCLEAR SCIENCE AND TECHNIQUES 29.3(2018):-.