Matched multi-trace geometry repeatability for time lapse seismic | |
Dong Feng-Shu1,2,3; Fu Li-Yun1; Quan Hai-Yan3; Dong Ke-Tong4 | |
刊名 | CHINESE JOURNAL OF GEOPHYSICS-CHINESE EDITION |
2016-08-01 | |
卷号 | 59期号:8页码:3056-3067 |
关键词 | Time-lapse seismic Normalized rms difference Multi-trace repeatability Best baseline-based match |
DOI | 10.6038/cjg20160828 |
文献子类 | Article |
英文摘要 | Time-lapse, or 4D, seismic technology is tool to monitor underground change for oil field maximum recovery Or other purpose especially associated to human being activities. Repeatability is a key issue for time-lapse seismic and geometry repeatability is a fundamental element to essentially affect the repeatability. There were many practices to improve repeatability during data processing, but geometry repeatability needs to be acquired during monitor data acquisition phase. Theory and practice shows geometry has been determined in acquisition cannot be improved in processing. Thus, geometry repeatability analysis is important. Multi-trace geometry repeatability rises from practical situation. Multi-trace geometry repeatability is important for overall geometry repeatability evaluation. Forthgoers evaluate difference or repeatability of time-lapse seismic data by normalized rms difference (NRMS). The definition of multi-trace repeatability can be derived from NRMS for time-lapse seismic/4D seismic data, showing that multi-trace repeatability is weighted RMS of all single traces. Noting that the uncertainty of the match between Monitor data and Baseline data and that probable data size difference between Monitor and Baseline, the repeatability of the best baseline-based match with imaginary data for mismatch was employed. Derived from forthgoers' researches, the linear model of relation between seismic data repeatability and geometry repeatability was established, and the weighted RMS geometry repeatability of the best baseline-based match with extrapolation for mismatch was obtained as the equivalent of the repeatability of the best baseline-based match with imaginary data for mismatch. The weighted coefficient is determined on the basis of NMO and its stretch. Application study was also conducted based on real data to demonstrate that the new geometry repeatability can be utilized to valuate geometry repeatability during 4D monitor seismic data acquisition. The application study showed that one display of the multi-trace geometry repeatability upon best baseline-based match with extrapolation for mismatch can indicate repeatability and effect of fold of coverage simultaneously. The calculation in application was simplified for speed improvement, which is not yet the main point in this article. |
WOS研究方向 | Geochemistry & Geophysics |
语种 | 英语 |
WOS记录号 | WOS:000381166400028 |
内容类型 | 期刊论文 |
源URL | [http://ir.iggcas.ac.cn/handle/132A11/53368] |
专题 | 地质与地球物理研究所_中国科学院地球与行星物理重点实验室 |
作者单位 | 1.Chinese Acad Sci, Inst Geol & Geophys, Beijing 100029, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.CNPC, BGP, Zhuozhou 072751, Peoples R China 4.Hebei Univ Technol, Exchange Sch Int Educ, Tianjin 300401, Peoples R China |
推荐引用方式 GB/T 7714 | Dong Feng-Shu,Fu Li-Yun,Quan Hai-Yan,et al. Matched multi-trace geometry repeatability for time lapse seismic[J]. CHINESE JOURNAL OF GEOPHYSICS-CHINESE EDITION,2016,59(8):3056-3067. |
APA | Dong Feng-Shu,Fu Li-Yun,Quan Hai-Yan,&Dong Ke-Tong.(2016).Matched multi-trace geometry repeatability for time lapse seismic.CHINESE JOURNAL OF GEOPHYSICS-CHINESE EDITION,59(8),3056-3067. |
MLA | Dong Feng-Shu,et al."Matched multi-trace geometry repeatability for time lapse seismic".CHINESE JOURNAL OF GEOPHYSICS-CHINESE EDITION 59.8(2016):3056-3067. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论