Interference pattern period measurement at picometer level
Lu, Yancong; Wei, Chunlong; Xiang, Xiansong; Jia, Wei; Zhou, Changhe; Li, Minkang
2017
通讯作者xiangxs@siom.ac.cn
英文摘要To produce large scale gratings by Scanning Beam Interference Lithography (SBIL), a light spot containing grating pattern is generated by two beams interfering, and a scanning stage is used to drive the substrate moving under the light spot. In order to locate the stage at the proper exposure positions, the period of the Interference pattern must be measured accurately. We developed a set of process to obtain the period value of two interfering beams at picometer level. The process includes data acquisition and data analysis. The data is received from a photodiode and a laser interferometer with sub-nanometer resolution. Data analysis differs from conventional analyzing methods like counting wave peaks or using Fourier transform to get the signal period, after a preprocess of filtering and envelope removing, the mean square error is calculated between the received signal and ideal sinusoid waves to find the best-fit frequency, thus an accuracy period value is acquired, this method has a low sensitivity to amplitude noise and a high resolution of frequency. With 405nm laser beams interfering, a pattern period value around 562nm is acquired by employing this process, fitting diagram of the result shows the accuracy of the period value reaches picometer level, which is much higher than the results of conventional methods.
会议录HOLOGRAPHY, DIFFRACTIVE OPTICS, AND APPLICATIONS VII
语种英语
ISSN号0277-786X
内容类型会议论文
源URL[http://ir.siom.ac.cn/handle/181231/27451]  
专题上海光学精密机械研究所_信息光学与光电技术实验室
作者单位中国科学院上海光学精密机械研究所
推荐引用方式
GB/T 7714
Lu, Yancong,Wei, Chunlong,Xiang, Xiansong,et al. Interference pattern period measurement at picometer level[C]. 见:.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace