Microstructures, mechanical properties and corrosion behavior of high-pressure die-cast Mg-4Al-0.4Mn-xPr (x=1, 2, 4, 6) alloys | |
Zhang JH ; Liu K ; Fang DQ ; Qiu X ; Yu P ; Tang DX ; Meng J | |
刊名 | journal of alloys and compounds |
2009 | |
卷号 | 480期号:2页码:810-819 |
关键词 | MG-AL MAGNESIUM ALLOYS SI ND |
ISSN号 | 0925-8388 |
通讯作者 | meng j |
中文摘要 | mg-4al-0.4mn-xpr (x = 1, 2, 4 and 6 wt.%) magnesium alloys were prepared successfully by the high-pressure die-casting technique. the microstructures, mechanical properties, corrosion behavior as well as strengthening mechanism were investigated. the die-cast alloys were mainly composed of small equiaxed dendrites and the matrix. the fine rigid skin region was related to the high cooling rate and the aggregation of alloying elements, such as pr. with the pr content increasing, the alpha-mg grain sizes were reduced gradually and the amounts of the al2pr phase and all, pr-3 phase which mainly concentrated along the grain boundaries were increased and the relative volume ratio of above two phases was changed. considering the performance-price ratio, the pr content added around 4 wt.% was suitable to obtain the optimal mechanical properties which can keep well until 200 degrees c as well as good corrosion resistance. the outstanding mechanical properties were mainly attributed to the rigid casting surface layer, grain refinement, grain boundary strengthening obtained by an amount of precipitates as well as solid solution strengthening. |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000267798600134 |
公开日期 | 2010-06-18 |
内容类型 | 期刊论文 |
源URL | [http://202.98.16.49/handle/322003/13001] |
专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
推荐引用方式 GB/T 7714 | Zhang JH,Liu K,Fang DQ,et al. Microstructures, mechanical properties and corrosion behavior of high-pressure die-cast Mg-4Al-0.4Mn-xPr (x=1, 2, 4, 6) alloys[J]. journal of alloys and compounds,2009,480(2):810-819. |
APA | Zhang JH.,Liu K.,Fang DQ.,Qiu X.,Yu P.,...&Meng J.(2009).Microstructures, mechanical properties and corrosion behavior of high-pressure die-cast Mg-4Al-0.4Mn-xPr (x=1, 2, 4, 6) alloys.journal of alloys and compounds,480(2),810-819. |
MLA | Zhang JH,et al."Microstructures, mechanical properties and corrosion behavior of high-pressure die-cast Mg-4Al-0.4Mn-xPr (x=1, 2, 4, 6) alloys".journal of alloys and compounds 480.2(2009):810-819. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论