CORC  > 金属研究所  > 中国科学院金属研究所
Cold Cracking Sensitivity of a Newly Developed 9Cr2WVTa Steel
Wang, Jian ; Lu, Shanping ; Li, Yongkui ; Hu, Qingxian ; Rong, Lijian ; Li, Dianzhong
刊名JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
2017
卷号26期号:1页码:258-267
关键词cold cracking diffusible hydrogen implant test modeling and simulation steel Y-groove cracking test
ISSN号1059-9495
通讯作者Lu, SP (reprint author), Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, Shenyang 110016, Peoples R China. ; Lu, SP (reprint author), Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China.
中文摘要Cold cracking susceptibility of the newly developed 9Cr2WVTa steel plate welded with the corresponding gas tungsten arc welding wire has been evaluated using the implant test and the Y-groove cracking test. Measurement of diffusible hydrogen content shows that the welding wire is ultra-low welding consumables (0.40 mL/100 g). Results of the implant test show that the fracture critical stress without pre-heating is only 300 MPa and increases up to the yield strength with pre-heating to 150 A degrees C. The fracture critical stress under high heat input decreases to 250 MPa owing to the formation of quenched microstructure. Fractographies show ductile dimple fracture under higher loads and quasi-cleavage fracture under lower loads. Results of Y-groove cracking tests show that the minimum pre-heating temperature is 150 A degrees C and the maximum transverse residual stress is located at the root of the weld metal. Therefore, the heat input should be chosen in a proper range and the pre-heating temperature is no less than 150 A degrees C.
学科主题Materials Science, Multidisciplinary
收录类别SCI
资助信息National Natural Science Foundation of China [91226204]; Chinese Academy of Science [XDA03010304]
语种英语
公开日期2017-08-17
内容类型期刊论文
源URL[http://ir.imr.ac.cn/handle/321006/78371]  
专题金属研究所_中国科学院金属研究所
推荐引用方式
GB/T 7714
Wang, Jian,Lu, Shanping,Li, Yongkui,et al. Cold Cracking Sensitivity of a Newly Developed 9Cr2WVTa Steel[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2017,26(1):258-267.
APA Wang, Jian,Lu, Shanping,Li, Yongkui,Hu, Qingxian,Rong, Lijian,&Li, Dianzhong.(2017).Cold Cracking Sensitivity of a Newly Developed 9Cr2WVTa Steel.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,26(1),258-267.
MLA Wang, Jian,et al."Cold Cracking Sensitivity of a Newly Developed 9Cr2WVTa Steel".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 26.1(2017):258-267.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace