题名 | EtherCAT工业以太网技术研究及其在纯软件开放式CNC中的应用; Research on EtherCAT Industrial Ethernet Technology and Its Application in Pure-Soft Open CNC |
作者 | 陈华 |
答辩日期 | 2011 ; 2011 |
导师 | 陈永明 |
关键词 | EtherCAT工业以太网 ServoWorks CNC 加工中心 EtherCAT Industrial Ethernet ServoWorks CNC Machine Center |
英文摘要 | 随着现场总线和工业实时以太网技术的发展,伺服运动控制系统已经从集中式模拟量控制发展为全数字网络化控制,其高可靠性、高效率性和开放性已成为伺服运动控制的发展趋势。 EtherCAT使用标准以太网技术,是一种开放的实时全双工以太网络通信协议,具有高速和高数据有效率、拓扑灵活、安全可靠、兼容性强等特点。EtherCAT主站使用标准的以太网控制器,从站使用专用控制芯片ESC,采用技术可行且经济实用的方法,使以太网技术延伸至I/O级,是一种实时性能优越且成本低廉的网络技术。 鉴于EtherCAT的杰出性能,本文依据厦门大学数控实验室对基于EtherCAT通信平台的ServoWorksCNC的课题研究...; With the development of fieldbus and real-time indusrial Ethernet, servo motion control system has developed from centralized analog control to all-digital network control, and has been the trends of servo motion control because of its high reliability, efficiency and openness. EtherCAT is an open real-time full-duplex Ethernet protocol with high data speed and efficiency that uses standard Ether...; 学位:工学硕士; 院系专业:物理与机电工程学院机电工程系_机械电子工程; 学号:19920081152923 |
语种 | zh_CN |
出处 | http://210.34.4.13:8080/lunwen/detail.asp?serial=30638 |
内容类型 | 学位论文 |
源URL | [http://dspace.xmu.edu.cn/handle/2288/54571] |
专题 | 物理技术-学位论文 |
推荐引用方式 GB/T 7714 | 陈华. EtherCAT工业以太网技术研究及其在纯软件开放式CNC中的应用, Research on EtherCAT Industrial Ethernet Technology and Its Application in Pure-Soft Open CNC[D]. 2011, 2011. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论