CORC  > 厦门大学  > 物理技术-学位论文
题名层流小火焰模型在湍流扩散火焰数值模拟中的应用; Applications of the Laminar Flamelet Model for the Numerical Simulation of Diffusion Turbulent Combustion
作者解天放
答辩日期2014 ; 2014
导师王培勇
关键词湍流扩散火焰 层流小火焰模型 概率密度函数 标量耗散率 混合分数 Turbulent Diffusion Flames Laminar Flamelet Model Probability Density Function Scalar Dissipation Rate Mixture Fraction
英文摘要本文首先对氢气—空气的层流对冲扩散火焰进行了详细的数值模拟,研究了拉伸率对火焰温度和火焰宽度的影响,结果表明拉伸率的增加会使得火焰的最高温度下降,火焰的宽度变窄。 采用Chemkin软件包、FlameMaster软件包和修改后的Chemkin源代码,以混合分数为自变量,以标量耗散率为参数,建立了各组分质量分数值以及温度值的二维层流小火焰数据库分表。再将结果通过概率密度函数进行耦合积分,得到了层流小火焰数据库总表。 最后,将层流小火焰模型应用于湍流扩散火焰的数值模拟,对氢气—空气的非预混湍流燃烧进行了初步的研究。主要探究了路易斯数、混合分数和标量耗散率的选择对湍流扩散火焰计算值的影响。将得到...; In this thesis, firstly, the strain rate effects on the counterflow hydrogen-air diffusion flames are numerically studied. Results indicate that the maximum flame temperature and the flame width decrase with the strain rate. Secondly, the partition tables of the laminar flamelet are built up by using the Chemkin software package, the FlameMaster software package and the modified source code of Ch...; 学位:工学硕士; 院系专业:物理与机电工程学院_航空宇航制造工程; 学号:32020101152686
语种zh_CN
出处http://210.34.4.13:8080/lunwen/detail.asp?serial=47115
内容类型学位论文
源URL[http://dspace.xmu.edu.cn/handle/2288/84148]  
专题物理技术-学位论文
推荐引用方式
GB/T 7714
解天放. 层流小火焰模型在湍流扩散火焰数值模拟中的应用, Applications of the Laminar Flamelet Model for the Numerical Simulation of Diffusion Turbulent Combustion[D]. 2014, 2014.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace