QQ客服 官方微博 反馈留言

	基于茂金属催化剂的聚乙烯颗粒内部的单颗粒传质模型; Polyethylene Intrapartiele Mass Transfer Model in Ethylene Polymerization on Supported Metallocene Catalyst
	谢瑞金 ; 黄凯 ; 罗正鸿
	2009
关键词	茂金属催化剂 乙烯聚合 聚乙烯 单颗粒传质模型 催化剂破裂 metallocene catalyst ethylene polymerization polyethylene single particle mass transfer model catalyst fragmentation
英文摘要	针对负载型茂金属催化剂催化乙烯聚合中的聚乙烯颗粒增长过程,采用改进的多粒模型建立了淤浆聚合条件下聚乙烯颗粒内部的单颗粒传质模型。采用该模型分析了负载型茂金属催化剂在聚合过程中的破碎行为,结合本征反应考察了传质对聚合反应的影响,计算出乙烯单体浓度和聚乙烯颗粒孔隙率在聚合过程中的变化。模拟结果表明,聚乙烯颗粒内部的传质阻力对聚合反应影响较大,聚合反应约200 S后,负载型茂金属催化剂由外至里逐层破裂。; Ethylene slurry polymerization on silica-supported metallocene catalyst was simulated based on a modified multigrain model.The modified model combined with the intrinsic reaction investigation was used to analyze catalyst fragmentation and polyethylene intraparticle mass transfer.The model can be used to calculate monomer concentration and growth of macro-particle during polymerization.The model can also be applied to predict the variations of particle porosity and monomer concentration distribution during the polymerization.Intraparticle mass transfer resistance has great effect on polymerization.The catalyst fragmentation happen shell-by-shell from surface to centre of catalyst at 200 s after starting of polymerization.; 中国石油兰州石油化工研究中心资助项目(2007019)
语种	zh_CN
内容类型	期刊论文
源URL	[http://dspace.xmu.edu.cn/handle/2288/106182]
专题	化学化工－已发表论文
推荐引用方式 GB/T 7714	谢瑞金,黄凯,罗正鸿. 基于茂金属催化剂的聚乙烯颗粒内部的单颗粒传质模型, Polyethylene Intrapartiele Mass Transfer Model in Ethylene Polymerization on Supported Metallocene Catalyst[J],2009.
APA	谢瑞金,黄凯,&罗正鸿.(2009).基于茂金属催化剂的聚乙烯颗粒内部的单颗粒传质模型..
MLA	谢瑞金,et al."基于茂金属催化剂的聚乙烯颗粒内部的单颗粒传质模型".(2009).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。