柴油机控制用燃烧状态分析单元开发研究 | |
方成 ; 高国景 ; 杨福源 ; 项旭昇 ; 李进 ; FANG Cheng ; GAO Guo-jing ; YANG Fu-yuan ; XIANG Xu-sheng ; LI Jin | |
2016-03-30 ; 2016-03-30 | |
关键词 | 内燃机 燃烧状态分析单元 燃烧状态指标 指示平均有效压力 50%放热点 IC engine in-cylinder combustion analysis unit combustion condi-tion index IMEP CA50 TK421.2 |
其他题名 | Development of Control-Oriented In-Cylinder Combustion Analysis Unit for Diesel Engine |
中文摘要 | 基于MPC5644A单片机开发了新一代的柴油机燃烧状态分析单元:使用曲轴转速信号得到0.2°CA的缸压采集触发信号,实时采集各缸缸内压力信号,并合理分配计算负荷,计算出控制所需的燃烧状态指标。在中型高压共轨柴油机上的试验表明:该基于MPC5644A的柴油机燃烧状态分析单元,能够实时采集缸压信息并计算出瞬时燃烧放热率、累积燃烧放热率、指示平均有效压力和50%放热点等燃烧状态指标,满足基于缸压信息的柴油机控制的要求。; Based on MPC5644A microcontroller,a new in-cylinder combustion analysis unit was developed.The unit took cylinder pressure signal once every 0.2癈A,and calculate combustion indexes according to the pressure and its position information cycle by cycle.Verification test in a 4.75Lcommon rail diesel engine demonstrates that the unit successfully acquires the real-time information and provides the combustion indexes,such as instantaneous and integrated heat release rate,IMEP,CA50,etc.,satisfying the control requirements of diesel engine. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/144697] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 方成,高国景,杨福源,等. 柴油机控制用燃烧状态分析单元开发研究[J],2016, 2016. |
APA | 方成.,高国景.,杨福源.,项旭昇.,李进.,...&LI Jin.(2016).柴油机控制用燃烧状态分析单元开发研究.. |
MLA | 方成,et al."柴油机控制用燃烧状态分析单元开发研究".(2016). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论