QQ客服 官方微博 反馈留言

	热处理对大型镜板硬度均匀性控制的影响
	罗晋平 ; 钟约先 ; 马庆贤 ; 袁朝龙 ; LUO Jinping ; ZHONG Yuexian ; MA Qingxian ; YUAN Chaolong
	2016-03-30 ; 2016-03-30
关键词	热处理 大型镜板 25CrMo4 硬度均匀性 淬火 回火 heat treatment large runner plate 25CrMo4 hardness uniformity quenching temper TG156
其他题名	Effect of heat treatment on hardness uniformity of 25CrMo4 used for runner plate of 700 MW hydrogenerator
中文摘要	某700 MW水轮机组的大型镜板采用25CrMo4钢锭锻造而成,其镜面硬度均匀性是国产化的技术难点之一.为了给镜板制造工艺的制定提供理论基础,必须对25CrMo4钢的热处理性能进行研究.本文从热处理工艺的角度,采用模拟实验方法分析了淬火温度、回火温度和淬硬深度对25CrMo4的微观组织及硬度均匀性的影响.根据研究结果,对镜板面硬度差的质量控制提出以下热处理参考意见:镜板面各点回火温度波动极限应小于40℃,淬火深度差应控制在30 mm以内,同时要避免淬火时镜板面的不均匀换热.; A large runner plate of 700 MW domestic hydrogenerator is manufactured with ingot of 25CrMo4 by forging. The high standard of hardness uniformity of mirror surface is a main technical difficulty of domestic large runner plate. To provide basic theory for manufacturing process of large runner plate,the heat treatment properties of 25CrMo4 must be studied. From the point of heat treatment,the effect of temperature and harden ability on microstructure and hardness uniformity of 25CrMo4 is investigated by heat-treating test. According to the results,some advice about control hardness uniformity of mirror surface are giving: the range of holding temperature variation between any points of runner surface must be limited to 40 ℃,the difference of depth of hardening must be less than 30 mm,meanwhile,non-uniform heat transfer on mirror surface must be avoided.
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/144395]
专题	清华大学
推荐引用方式 GB/T 7714	罗晋平,钟约先,马庆贤,等. 热处理对大型镜板硬度均匀性控制的影响[J],2016, 2016.
APA	罗晋平.,钟约先.,马庆贤.,袁朝龙.,LUO Jinping.,...&YUAN Chaolong.(2016).热处理对大型镜板硬度均匀性控制的影响..
MLA	罗晋平,et al."热处理对大型镜板硬度均匀性控制的影响".(2016).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。