Fe-Cu复合催化剂催化CO_2加氢制备液态烃的研究 | |
杨铮 ; 丁冉冉 ; 华德润 ; 刘吉 ; 陈宇 ; 吴玉龙 ; YANG Zheng ; DING Ran-ran ; HUA De-run ; LIU Ji ; CHEN Yu ; WU Yu-long | |
2016-03-30 ; 2016-03-30 | |
关键词 | CO2加氢 液态烃 铁基催化剂 铜助剂 poly(butylene succinate) corn starch glycerol blends mechanical properties TQ211 |
其他题名 | Production of liquid hydrocarbons from CO_2 catalytic hydrogenation process over Fe-Cu composite catalyst |
中文摘要 | 采用共沉淀法制备了一系列复合催化剂Fe-Cu-Al-K,并对这些复合催化剂加氢催化CO2制备液态烃的催化性能进行了研究;通过XRD、TEM、BET、H2-TPR和CO2-TPD等分析方法对催化剂进行了表征。研究结果发现,Cu渗入到了Fe的晶格内,Cu的加入有助于催化剂比表面积的增加和CO2吸附量的提高,并促进了催化剂的还原过程。催化性能测试结果表明:在300℃、2 MPa、空速2 000 mg/[g(cat.)·h]和H2/CO2摩尔比为3的条件下,Cu的加入有助于获得较高的催化活性和油相产率,并有利于油相中碳链较长的液态烃的生成。当Cu质量分数为6.6%时,催化效果最好,转化率为34.58%,C+6选择性为29.26%,油相产率为10.7 mg/[g(cat.)·h]。; A series of composite Fe-Cu-Al-K catalysts with different Cu content are prepared by co-precipitation method. The hydrogenation of CO2 to liquid hydrocarbons is investigated. The catalysts are characterized by XRD,TEM,BET surface area,H2-TPR and CO2-TPD. The results show that the Cu has doped into the Fe2O3 crystals. The addition of Cu increases the surface area and CO2 adsorption capacity,as well as promotes the reduction of the catalysts. The reaction test is under the condition of 300℃,2 MPa,2 000 mg /[g( cat.)·h]of space velocity and 3 of n( H2/CO2). When Cu content is 6. 6%,the catalyst shows the best catalytic performance. The conversion and selectivity of C+6are 34. 58% and29. 26%,respectively. The oil yield is 10. 7 mg /[g( cat.)·h]. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/143928] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 杨铮,丁冉冉,华德润,等. Fe-Cu复合催化剂催化CO_2加氢制备液态烃的研究[J],2016, 2016. |
APA | 杨铮.,丁冉冉.,华德润.,刘吉.,陈宇.,...&WU Yu-long.(2016).Fe-Cu复合催化剂催化CO_2加氢制备液态烃的研究.. |
MLA | 杨铮,et al."Fe-Cu复合催化剂催化CO_2加氢制备液态烃的研究".(2016). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论