QQ客服 官方微博 反馈留言

	Pitting Life Prediction Based on a 3D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation
	Zhu, Dong ; Ren, Ning ; Wang, Q. Jane
	2010-10-12 ; 2010-10-12 ; OCT
关键词	elastodynamics fatigue gears hydrodynamics lubrication mechanical contact reliability surface roughness ELASTOHYDRODYNAMIC LUBRICATION SURFACE-ROUGHNESS FATIGUE MODEL DEFECTS Engineering, Mechanical
中文摘要	Surface pitting due to contact fatigue is a major failure mode of many mechanical components, such as various gears and rolling-element bearings. Pitting life prediction, therefore, is vital to design and performance/reliability improvements. Conventional prediction methods, commonly found in industrial standards, are based on the Hertzian contact theory under the assumptions that surfaces are ideally smooth with no lubrication. Today, the trend of high power density, high reliability compact design requires the life prediction to consider severe operation conditions in mixed lubrication, and the effect of surface roughness and topography. Also, it has been well known that ductile material failures in concentrated contacts are better correlated with the subsurface von Mises stress, rather than the normal Hertzian pressure. The present study aims to develop a pitting life prediction approach for line-contact components based on a 3D line-contact mixed elastohydrodynamic lubrication (EHL) model recently developed by Ren (2009, "A Three-Dimensional Deterministic Model for Rough Surface Line-Contact EHL Problems," ASME J. Tribol., 131, p. 011501), which is capable of simulating the entire transition from full-film and mixed EHL down to dry contact of real machined rough surfaces under severe operating conditions. The pitting life evaluation employs the fatigue life model developed by Zaretsky (1987, "Fatigue Criterion to System Design, Life and Reliability," J. Propul. Power, 3(1), pp. 76-83) and extended by Epstein (2003, "Effect of Surface Topography on Contact Fatigue in Mixed Lubrication," Tribol. Trans., 46, pp. 506-513) using the von Mises stress field calculated based on the rough surface mixed-EHL results. Sample cases are analyzed for 15 sets of transmission gears, and the life prediction results are compared with available experimental data. With optimized material constants in the life model, predicted pitting life results well agree with the test data.
语种	英语 ; 英语
出版者	ASME-AMER SOC MECHANICAL ENG ; NEW YORK ; THREE PARK AVE, NEW YORK, NY 10016-5990 USA
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/80274]
专题	清华大学
推荐引用方式 GB/T 7714	Zhu, Dong,Ren, Ning,Wang, Q. Jane. Pitting Life Prediction Based on a 3D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation[J],2010, 2010, OCT.
APA	Zhu, Dong,Ren, Ning,&Wang, Q. Jane.(2010).Pitting Life Prediction Based on a 3D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation..
MLA	Zhu, Dong,et al."Pitting Life Prediction Based on a 3D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。