CORC  > 清华大学
Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy
Yao, Zongyong ; Huang, Guangjie ; Godfrey, Andrew ; Liu, Wei ; Liu, Qing
2010-10-12 ; 2010-10-12
关键词GRAIN-ORIENTATION DEPENDENCE SINGLE-CRYSTALS LOCAL CRYSTALLOGRAPHY SLIP PATTERN CUBE TEXTURE DEFORMATION MICROSTRUCTURE RECRYSTALLIZATION PARTICLES ALIGNMENT Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering
中文摘要The evolution of the dislocation boundary structure during the cold rolling of the AA3104 aluminum alloy has been investigated using electron channeling contrast (ECC) imaging and electron backscattered diffraction (EBSD) techniques. The results show that there is a strong correlation between the dislocation boundary structure and the grain orientation. No strong effect of strain level or second-phase particles on the structure-orientation correlation is found. Based on these observations, the microstructures can be classified into one of three types: type A grains, containing two sets of geometrically necessary boundaries (GNBs), type B grains, containing one set of GNBs, and type C grains, consisting of a structure of large dislocation cells. Grains with a type A microstructure have orientations near the copper, brass, and Goss orientations; grains with a type B microstructure are primarily near the S orientation; and grains with a type C microstructure have orientations near the cube orientation. The alignment of the extended dislocation boundaries depends strongly on the grain orientation. In most grains, the boundaries are parallel to the traces of the most active {111} slip planes, as identified by a Schmid factor analysis.
语种英语 ; 英语
出版者SPRINGER ; NEW YORK ; 233 SPRING ST, NEW YORK, NY 10013 USA
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/78164]  
专题清华大学
推荐引用方式
GB/T 7714
Yao, Zongyong,Huang, Guangjie,Godfrey, Andrew,et al. Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy[J],2010, 2010.
APA Yao, Zongyong,Huang, Guangjie,Godfrey, Andrew,Liu, Wei,&Liu, Qing.(2010).Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy..
MLA Yao, Zongyong,et al."Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace