QQ客服 官方微博 反馈留言

	平面应变压缩过程中初始取向对AZ31镁合金变形行为的影响(英文)
	裴颖 ; GODFREY Andrew ; 刘伟 ; 蒋佳 ; 刘庆 ; PEI Ying ; GODFREY Andrew ; LIU Wei ; JIANG Jia ; LIU Qing
	2010-06-10 ; 2010-06-10
关键词	镁合金 平面应变压缩 EBSD 孪生 滑移 magnesium alloys plane strain compression EBSD twinning slip TG146.22
其他题名	Effect of crystal orientation on the deformation behavior of the magnesium alloy AZ31 during plane strain compression
中文摘要	在室温和150℃下对AZ31镁合金进行平面应变压缩试验,应变速率为0.01s-1,形变量为0.1。试样(切割于强织构的热轧板)的压缩轴c与其基面法向成不同的角度,从而研究初始织构对AZ31镁合金塑性变形行为的影响。利用电子背散射衍射花样(EBSD)采集变形试样的微观结构和织构信息,分析孪生和滑移行为。实验发现AZ31镁合金塑性变形由{102} <011>拉伸孪生和基面滑移共同控制,并确定了各种变形模式比例与晶体初始取向的关系,其中拉伸孪生在压缩轴垂直于c轴方向时占主导作用。; Plane strain (channel-die) compression tests have been carried out at room temperature and 150℃ on the magnesium alloy AZ31 up to a strain of ε=0.1 at a strain rate of 0.01 s~ -1 . The effect of initial crystal orientation was examined by cutting samples from a highly textured hot-rolled sheet with the compression axis oriented at differing angles to the normal direction of the hot-rolled sheet. The microstructure and texture of the deformed samples were characterized using the electron backscattered diffraction technique, and the information obtained used to analyze the twinning and slip activity. It was found that plastic deformation is controlled by a mixture of {1012}<1011> extension twinning and basal plane slip. A continuous dependence of the contributions of each of these deformation modes on the initial crystal orientation was found, with extension twinning dominating in samples compressed perpendicular to the unit cell c-axis direction.; 国家重点基础研究发展计划(973)(No.2007CB613703); 国际科技合作计划项目(No.2006DFA51160)
语种	英语 ; 英语
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/61401]
专题	清华大学
推荐引用方式 GB/T 7714	裴颖,GODFREY Andrew,刘伟,等. 平面应变压缩过程中初始取向对AZ31镁合金变形行为的影响(英文)[J],2010, 2010.
APA	裴颖.,GODFREY Andrew.,刘伟.,蒋佳.,刘庆.,...&LIU Qing.(2010).平面应变压缩过程中初始取向对AZ31镁合金变形行为的影响(英文)..
MLA	裴颖,et al."平面应变压缩过程中初始取向对AZ31镁合金变形行为的影响(英文)".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。