QQ客服 官方微博 反馈留言

	微细1-3型PZT/环氧树脂压电复合材料的制备及其性能
	甄玉花 ; 李敬锋 ; ZHEN Yuhua ; LI Jingfeng
	2010-06-10 ; 2010-06-10
关键词	压电复合材料 切割浇注 压电性能 锆钛酸铝 环氯树脂 piezoelectric composite cut-fill piezoelectricl property lend zirconate titanate epoxy TB332
其他题名	FABRICATION AND PROPERTIES OF FINE SCALE 1-3 PZT/EPOXY PIEZOELECTRIC COMPOSITES
中文摘要	提出了一种改良型切割浇注工艺,并利用该工艺制备了锆钛酸铅(lead zirconate titanate,PZT)柱宽为120μm,纵横比大于10的13型PZT/环氧树脂压电复合材料,并对制备过程中影响复合材料特性的各种影响因素进行了讨论比较。结果表明这种复合材料的谐振模式单一,与PZT相比声阻抗大幅降低,前者为31Mrayl,后者仅为4.5~5.5Mrayl。; A modified cutfill process was developed in this study, by which a fine-scale 13 epoxy matrix composite PE2 containing lead zirconate titanate (PZT) arrays of 120μm in width and a height/width ratio of higher than 10 was produced. The preparation factors′effect on the properties of the composites were discussed. The results show that the resonant mode of the composites is single mode, and the acoustic impedance (4.5—5.5 Mrayl) of the composites is obviously less than that (31 Mrayl) of the PZT ceramic.
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/61395]
专题	清华大学
推荐引用方式 GB/T 7714	甄玉花,李敬锋,ZHEN Yuhua,等. 微细1-3型PZT/环氧树脂压电复合材料的制备及其性能[J],2010, 2010.
APA	甄玉花,李敬锋,ZHEN Yuhua,&LI Jingfeng.(2010).微细1-3型PZT/环氧树脂压电复合材料的制备及其性能..
MLA	甄玉花,et al."微细1-3型PZT/环氧树脂压电复合材料的制备及其性能".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。