CORC  > 清华大学
轴流式原型和模型水轮机的压力脉动相似性分析
邵杰 ; 陈铁军 ; 刘树红 ; 吴玉林 ; SHAO Jie ; CHEN Tiejun ; LIU Shuhong ; WU Yulin
2010-06-08 ; 2010-06-08
关键词流体机械及工程 相似性分析 RNGk-epsilon湍流模型 轴流式水轮机 压力脉动 fluid mechanics and engineering,similarity analysis,RNG k-epsilon turbulence model Kaplan turbine pressure pulsation TK730.1
其他题名Pressure pulsation similarity relationship between model and prototype Kaplan turbines
中文摘要本文利用RNGk-epsilon湍流模型对轴流式原型和模型水轮机进行了全流道三维非定常湍流计算,预测原型和模型水轮机的压力脉动性能。在此基础上,本文通过对原型水轮机与模型水轮机压力脉动结果的比较,探讨两者在压力脉动性能方面可能存在的相似关系。结果表明,原型水轮机和模型水轮机的压力脉动具有相似的频率特征,但是振幅上并没有明确的相似规律可循。; Three-dimensional unsteady simulation using RNG k-espilon turbulence model was applied to the full flow passages of a model Kaplan turbine and a prototype Kaplan turbine,and the pressure pulsation was obtained.Comparison of the simulation results of the two turbines shows the same transmission mode of pressure pulsation,but does not show a similarity of the amplitude of pressure pulsation.The reason for this is discussed in detail.; 国家自然科学基金重点项目“水力旋转机械中非定常流动及其控制基础问题研究”(10532010); “巨型混流式水轮机组水力振动与稳定性研究”(90410019)资助
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/50573]  
专题清华大学
推荐引用方式
GB/T 7714
邵杰,陈铁军,刘树红,等. 轴流式原型和模型水轮机的压力脉动相似性分析[J],2010, 2010.
APA 邵杰.,陈铁军.,刘树红.,吴玉林.,SHAO Jie.,...&WU Yulin.(2010).轴流式原型和模型水轮机的压力脉动相似性分析..
MLA 邵杰,et al."轴流式原型和模型水轮机的压力脉动相似性分析".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace